Energy efficient Chongqing mechanism co. LTD , https://www.pushgenerator.ltd
Learn 9 cabinet wiring tips
In the entire network wiring project, cabinet wiring is a very particular job. How to make the cabinet wiring neat and beautiful is a big test of our weak electrician novice professional skills.
The importance of cabinet wiring
The cabinet systematically solves the problems of high-density heat dissipation, a large number of cable attachment and management, large-capacity power distribution, and full compatibility with rack equipment from different manufacturers in computer applications, so that the data center can operate in a highly stable environment .
With the vigorous development of the Internet industry and the upgrade of network products such as servers and switches, the cabinets used must accommodate more equipment than before. With the continuous increase of equipment, cabinet wiring needs to be arranged in an orderly manner.
If the cables in the cabinet wiring are not properly arranged and not enough, it will not only cause damage to the cables or prolong the time for replacing the cables, but also seriously hinder the flow of air and cause equipment to overheat and shut down.
Master these few tips so that your wiring can be organized, promotion and salary increase is not a problem.
Master these tips, keep your cabinet wiring organized
1. Ensure that the air-conditioning air outlet of the cabinet is open to prevent the equipment from overheating and causing crashes.
2. Each network cable inside the cabinet should be labeled to avoid unnecessary troubles caused by subsequent maintenance.
3. The switch should be fixed to the top of the cabinet with matching ears, which will help the network cables to be positioned.
4. Paste the asset number of each server, and print out the asset number + barcode together with a label printer. Two copies of each are printed, one on the front and one on the side of the device.
5, generally from the power cable and network cable from different directions, each section is tied with a cable tie.
6. The back end of the network cable head connecting the server and the switch should be labeled with the same number of cable tie labels, which should be the same as the switch port number.
7. When wiring the cabinet, make sure that the power cord plug and the server power connector are fixed with label ties at both ends.
8. The wiring between the cabinet and the cabinet is generally from the top direction of the cabinet.
9. If the cabinet is a switch with internal and external networks, try to use two different color network cables to distinguish them.
Cabinet wiring is a technical activity, and the wiring is well-organized, which not only brings great convenience for later maintenance, but also facilitates us to look inside the cabinet, and more importantly, allows the equipment to perform its proper performance.
More importantly, it is difficult for your boss to see such a great wiring without raising your salary.