CNC Fiber Laser Cutting Machine
CNC fiber laser cutting manchine is cutting-table structure designed machine with dual drive, effctive cutting range is from 1500mm to 6000mm. High-precision longitudinal and transverse linear rails drive high-precision helical gear and rack and it is available in speed up to 8000mm/min. Accelerated speed is 1G. Exchanging work tables are optional that optimize cutting productivity.
Made in China CNC fiber laser cutting machine
1.Technical specifications of CNC fiber laser cutting machine
Effective cutting length: 3000mm
Effective cutting width:1500mm
Max. speed:10000mm/min(returning speed)
CNC system:FSCUT
Laser generator:RFL-1000(Domestic sharp branch)
Smoke purification device: CCQ-9000
Cutting torch: 1group( Cyplite )
Torch THC:BCS100,elevating distance≥100mm
2.cutting speed parameter of CNC fiber laser cutting machine
The laser power and the cutting material thickness under certain conditions,
cutting speed varies with the composition of the material, specifically the ability
of different sheet metal cutting table below (for reference).
thickness
(mm)
speed
(mm/min)
pressure
(MPA)
thickness
(mm)
speed
(mm/min)
pressure
(MPA)
1000W
1mm
12000
0.6
1mm
15000
1.6
2mm
6000
0.6
2mm
5400
2.0
3mm
3600
0.5
3mm
1800
2.3
4mm
2700
0.4
4mm
1100
2.5
6mm
1200
0.15
8mm
960
0.13
10mm
600
0.13
3.RFL-1000 performance parameters of the fiber laser
parameter
RFL-1000
rated input voltage
220±10%VAC
modulation frequency
50kHZ
wave length
915nm
laser power
1000W
power consumption
<2kW
Size (length X width X height)
485mm X 237mm X 663mm
weight
<50Kg
gas
Air: 9 oxygen bar: 8 bar nitrogen: 27 bar
CNC Fiber Laser Cutting Machine,CNC Fiber Laser Cutter,CNC Fiber Laser Cutting Machinery,CNC Fiber Laser Router SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachines.com
In 2014, the door of the LED lighting market will be completely opened.
In 2014, the door to the LED lighting market will be completely opened. On January 1, 2014, the United States announced that it would no longer produce and sell 60-watt and 40-watt incandescent lamps. At the same time, Canada also officially banned 75-watt and 100-watt incandescent lamps. The EU completely banned the sale of incandescent lamps in 2012. Back to China, the price of LED lights has continued to fall, and has basically fallen to the threshold of civilian use. With the support of national policies, LED lighting will accelerate the replacement of traditional lighting. LED is expected to open twice after the market. At present, the demand for LED lighting is expected to increase more clearly. The year 2014 is expected to be an outbreak. In the base of 2013, optimism is expected to have more than doubled growth, and the cautious expectation is also doubled. A senior executive of a domestic LED chip manufacturer told reporters. This estimate is not without basis. On the one hand, it is the start of the domestic LED lighting market. In 2012, the penetration rate of LED lighting was less than 3, and in 2013, the penetration rate increased to 6, and the industry has entered a period of rapid growth through the introduction period. On the other hand, overseas markets have also given Chinese companies the opportunity. The General Administration of Customs estimates that the export growth rate of LED lighting products in the fourth quarter of 2013 will be above 80%. In 2014, the scale of the global commercial and residential lighting market will exceed 100 billion for the first time. In 2015, it is expected to reach 160 billion yuan, and the compound growth rate in the next two years will be around 60. Our company is very optimistic about the general trend of the LED lighting market to pick up, and has prepared for the upcoming outbreak of demand. Wang An, the director of Sanan Optoelectronics, said. The capital market is also optimistic about this long-term trend. According to Chen Li, an analyst at UBS Securities, compared with other growth industries, the current LED sector valuation is still relatively reasonable. The benchmark PE in 2014 is only 24 times, far lower than other growth stocks. The LED industry has performance support and is expected to grow by 30-50 in 2014, and is expected to achieve high growth in the first quarter. In the future, once the performance confirms the industry's upward trend, it will bring significant excess returns.