Normally, we will refuel after the car tank warning light is on. The yellow light on the oil indicator is just a hint. The designer considers that someone drives the car without looking at the oil meter, so with such a design, after the lights are turned on, etc. Going to the refueling is also a kind of default setting by the manufacturer. Normally, after the oil is turned on, the car can continue to operate for about 50 kilometers. It is enough for us to look for gas stations to supplement vehicle oil. However, this 50 km does not mean that all models are the same, and it is only a theoretical number. If the road conditions are different, this number will change. Although the warning light is on, we still have enough fuel to support us to find a gas station and we will not be able to refuel at once, but Xiao Bian suggests not to do so. 1. If the oil gauge warning light is on, we are driving on the highway and the fuel tank is almost out of oil. Then we don't know when we can reach the gas station to add more fuel. 2. The oil gauge warning light is on and the refueling is limited to finding a gas station to supplement the oil within a short time. If the distance is too far, the oil pump and the oil quantity sensor may be damaged. 3. In case of too little oil, excessive speed and topography cause the vehicle to significantly affect the work of the oil pump. After the editorial: usually have to arrange their own trip travel, pay attention to the adequacy of oil at any time, if the lack of fuel, you should turn off the air-conditioning as far as possible energy-saving driving. Avoid parking at graded locations. Parking at graded locations will cause fuel to flow to the rear of the fuel tank, causing the pump to fail to function properly. Reading Braille: Braille Instructions,Braille Alphabet,Braille Printing,Braille Packaging Box Shanghai Caide Printing Co.,Ltd. , https://www.caideprinting.com
1. Familiarize yourself with the Braille alphabet, which consists of six dots arranged in two columns of three dots each. Each dot or combination of dots represents a different letter, number, punctuation mark, or special symbol.
2. Place your fingertips lightly on the Braille text, typically on a page or surface made specifically for Braille.
3. Feel the dots with your fingertips and identify the patterns to determine the corresponding letters, numbers, or symbols.
4. Move your fingertips systematically across the Braille text, reading from left to right and top to bottom, just like reading regular text.
Writing Braille:
1. Learn the Braille alphabet and practice writing each letter, number, punctuation mark, and special symbol.
2. Use a Braille slate and stylus, which is a tool specifically designed for writing Braille. The slate has rectangular openings to hold the paper, and the stylus is used to press the dots onto the paper through the openings.
3. Place a piece of Braille paper or cardstock into the slate, ensuring it is aligned properly.
4. Hold the stylus like a pen or pencil and press the appropriate dots onto the paper, one at a time, following the Braille alphabet.
5. Lift the stylus after each dot is pressed to avoid smudging or blending the dots together.
6. Continue writing the desired text, moving from left to right and top to bottom on the paper.
7. Review your writing by feeling the dots with your fingertips to ensure accuracy.
It is important to note that learning Braille may require time and practice, as it is a tactile skill that requires the ability to distinguish between the different dot patterns. However, with dedication and persistence, individuals can become proficient in reading and writing Braille.