Hydraulic Busbar Bender/ Pipe Bender/Tube Bender (Y35-25)

Model NO.: Y35-25
Trademark: TSD
Specification: Y35-25
Origin: China
HS Code: 846229
Model NO.: Y35-25
Trademark: TSD
Specification: Y35-25
Origin: China
HS Code: 846229
Hydraulic Busbar Bender/ Pipe Bender/Tube Bender
model:Y35-25

The MACHINE is one kind of mini general hydraulic press through exchanging different dies, it can effect: Sheet strip bending; Sheet strip cutting; Square steel pipe cutting; Pipe bending; Other type bending. So, the machine combine the complex functions of several kinds of special machines, e. G. Shearing machinepress brake machinesawing machinebending machine and bending pipe machine & etc. The machine can be widely applied to the heavy and mini factories of processing industry lines, e. G. Machineryelectricchemical industryelectrical powershipbuildingmetal structure and building lines.

The pressing head of oil cylinder of machine with die work horizontally, the nominal pressure of pressing head is 250KN. Dies of different application may be supplied according to the requirements of customer.

The pressing head within strokes can be adjusted rapidlyarbitrarily and precisely to nominated position.

Convenient operation: The movement of pressing head can be controlled through the foot-switch and double hands switch. In case pushing the foot switch or double hands switch down, the pressing head will work forward to reach the adjusted position and stop automatically. Loosing the foot switch, the pressing head will return rapidly.

Special foundation is not been required. The machine can be directly put on the common cement ground.
Main specifications                                Model Y35--25B Y35--40B Y35--20 Y35--25---3 Y35--20----3 Y35L--25--3 Y35LW--20--3
Cutting Max. cutting width (mm) 120 150 120 120 120 150 150
M ax. cutting thickness(mm) 12 15 10 12 12 12 12
Horizontal bending M ax. bending width (mm) 120 120 × × × 150 ×
M ax. bending thickness (mm) 12 12 × × × 12 ×
M in. bending angle        (° ) 90° 90° × × × 90° ×
Vertical bending M ax. bending width (mm) 120 150 120 120 120 150 150
M ax. bending thickness (mm) 12 20 10 12 12 12 12
M in. bending angle 90° 90° 90° 90° 90° 90° 90°
Puching 4 single holes M ax. punching hole thickness (mm) 12 20 10 12 12 12 12
Punching head range for 6mmplate (dia. ) 7--21 7--21 7--21 7--21 7--21 7--21 7--21
Punching head range for 10mmplate 9--21 11--21 11--21 11--21 11--21 11--21 11--21
Punching head range for 20mmplate × 17--21 × × × × ×
Embossing Embossing range (mm) 120× 39 150× 39 120× 39 120× 39 120× 39 × ×
Imposed cable line Cable line range  (mm² ) 16--240 16--240 × × × × ×

 
 
 
 
 
 
 
 
Cutting angle steel Max. angle steel size (mm) 50× 50× 4 50× 50× 4 × × × × ×
Cutting square steel Max. square pipe size (mm) 60× 60× 2 60× 60× 2 × × × × ×
Bending pipe Max. pipe size (inch) 4′ --1″ 4′ --1″ × × × × ×
Pipe thickness (mm) 1.5--2.5 1.5--3 × × × × ×
Bending angle 0--180° 0--180° × × × × ×

After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
    management system in our company and on our products.
   All products before ex-works have been strictly tested and are in conformity with technical agreement and
   standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
    could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
    to guide the installation, testing and training the operators from 7 days to 45 days after the machine  
    reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
   (USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
    included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
    firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
    free to contact the Seller.  
    If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
    service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
    which is helpful for customers'  special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
    long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
    failure description, clear pictures and videos, if possible.
    Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
    B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
    service at lowest cost. 
  Hydraulic Busbar Bender/ Pipe Bender/Tube Bender
model:Y35-25

The machine is one kind of mini general hydraulic press through exchanging different dies, it can effect: Sheet strip bending; Sheet strip cutting; Square steel pipe cutting; Pipe bending; Other type bending. So, the machine combine the complex functions of several kinds of special machines, e. G. Shearing machinepress brake machinesawing machinebending machine and bending pipe machine & etc. The machine can be widely applied to the heavy and mini factories of processing industry lines, e. G. Machineryelectricchemical industryelectrical powershipbuildingmetal structure and building lines.

The pressing head of oil cylinder of machine with die work horizontally, the nominal pressure of pressing head is 250KN. Dies of different application may be supplied according to the requirements of customer.

The pressing head within strokes can be adjusted rapidlyarbitrarily and precisely to nominated position.

Convenient operation: The movement of pressing head can be controlled through the foot-switch and double hands switch. In case pushing the foot switch or double hands switch down, the pressing head will work forward to reach the adjusted position and stop automatically. Loosing the foot switch, the pressing head will return rapidly.

Special foundation is not been required. The machine can be directly put on the common cement ground.
Main specifications                                Model Y35--25B Y35--40B Y35--20 Y35--25---3 Y35--20----3 Y35L--25--3 Y35LW--20--3
Cutting Max. cutting width (mm) 120 150 120 120 120 150 150
M ax. cutting thickness(mm) 12 15 10 12 12 12 12
Horizontal bending M ax. bending width (mm) 120 120 × × × 150 ×
M ax. bending thickness (mm) 12 12 × × × 12 ×
M in. bending angle        (° ) 90° 90° × × × 90° ×
Vertical bending M ax. bending width (mm) 120 150 120 120 120 150 150
M ax. bending thickness (mm) 12 20 10 12 12 12 12
M in. bending angle 90° 90° 90° 90° 90° 90° 90°
Puching 4 single holes M ax. punching hole thickness (mm) 12 20 10 12 12 12 12
Punching head range for 6mmplate (dia. ) 7--21 7--21 7--21 7--21 7--21 7--21 7--21
Punching head range for 10mmplate 9--21 11--21 11--21 11--21 11--21 11--21 11--21
Punching head range for 20mmplate × 17--21 × × × × ×
Embossing Embossing range (mm) 120× 39 150× 39 120× 39 120× 39 120× 39 × ×
Imposed cable line Cable line range  (mm² ) 16--240 16--240 × × × × ×

 
 
 
 
 
 
 
 
Cutting angle steel Max. angle steel size (mm) 50× 50× 4 50× 50× 4 × × × × ×
Cutting square steel Max. square pipe size (mm) 60× 60× 2 60× 60× 2 × × × × ×
Bending pipe Max. pipe size (inch) 4′ --1″ 4′ --1″ × × × × ×
Pipe thickness (mm) 1.5--2.5 1.5--3 × × × × ×
Bending angle 0--180° 0--180° × × × × ×

After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
    management system in our company and on our products.
   All products before ex-works have been strictly tested and are in conformity with technical agreement and
   standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
    could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
    to guide the installation, testing and training the operators from 7 days to 45 days after the machine  
    reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
   (USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
    included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
    firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
    free to contact the Seller.  
    If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
    service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
    which is helpful for customers'  special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
    long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
    failure description, clear pictures and videos, if possible.
    Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
    B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
    service at lowest cost. 
 

TCCA 90%

Tcca 90%,Trichloroethane 90%,Trichloroisocyanuric Acid,Paper Mothproofing Agent

TIANJIN LIHE TRADING CO.,LTD , https://www.lihecorp.com