To make good use of CNC flame cutting machine, there are many aspects that need attention. In addition to the basic cutting speed, the cutting thickness has been cut height, but also need to pay attention to cutting gas. The key to mastering the flame of the torch is the gas source. Most of the oxygen on site is oxygen for the pipeline. The oxygen purity and pressure can generally meet the requirements for use, but the gas is mostly bottled gas, and 30 kg of a bottle of gas is used in 5 machines. The scale of the flow, the use of time is about 2 hours or so, this will inevitably have to replace the gas source in the middle, and then lead to gas pressure fluctuations, a direct impact on the flow of gas, resulting in abnormal cutting. Bottled gas has great fluctuations in gas source pressure at the beginning and end of each bottle of gas. The warm water heating method on site is a good treatment method, which can ultimately ensure the stability of the gas source. To ensure that the current equipment is in good condition, it is usually based on operating procedures. Regularly check for leaks in pipes, joints, etc., and lubricate the bearings, pin holes, etc., and clean the cutting nozzles, cooling water pipes, etc. to complete routine procedures. Work to ensure normal operation. CNC flame cutting machine is mainly suitable for medium-thickness plate cutting processing machinery equipment, compared to other similar thermal cutting methods, CNC flame cutting machine has a high cutting quality, cutting surface verticality, cutting thickness and other characteristics, is currently domestic The most widely used type of cutting processing in the market. Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: / The central motor we are referring to here is a central Ebike Motor used on lithium-ion assisted Electric Bicycles, while the common one is the motor used on lithium-ion mountain assisted bicycles. It was developed and put into use after the hub motor, and compared to the hub motor, the technology of the central motor is not yet very mature, so there is still a long way to go in terms of performance stability. But the central motor has a characteristic that hub motors do not have, which is its instantaneous starting assistance function, so it also has a corresponding market. The most common method is to install a center mounted motor on a mountain Electric Bike to meet the bumpy road conditions in the mountains, so both hub motors and center mounted motors have their advantages and disadvantages. The choice of motor depends entirely on which aspect of its functionality you value.Generally speaking, the central motor is used to assist mountain bikes, and hub motors are more common on urban series of assist bicycles. Electric Bicycle Motor ,Mid Motor,Ebike Motor Ejoysport Technology (SuZhou)Co.,LTD , https://www.nbtoperiding.com