Hot Filling Pet Bottle Automatic Blower

Model NO.: TBL
Trademark: tecreat
Specification: 25CBM
Origin: China
HS Code: 8477309990

Fully-Automatic PET Water Bottle Stretch Blow Moding Machine 

Description
It is can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle products
1-Can be connected with filling machine directly. Saving the investment on the ordering-bottle machine.
2-Adopting high technology Micro PLC controller. Ensure the machine working properly and stable.
3-Sole heating electricity saving design.50% electricity saving comparing to the other machine.
4-Specially mould locking clamping system, 1.5 times efficiency.
5- Easy installation and starting
6- Low rejection rate: Less than 0.3percent.
Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.3percent.

1.Functionand advantages
  1. Man-machine Interface control, easy to operate
  2. Automatic preform loading and unscrambling
  3. Preform hopper
  4. Stable preform alignment, loading preforms according to capacity
  5. Close structure, low contamination
  6. Well preform heating system
  7. Stable rotating system
  8. Preforms are evenly heated, and easy to blow
  9. Low energy consumption, heating capacity is adjustable
  10. Recycling air cooling system in oven (option)
  11. Heating system is a mutual feedback and closed loop system, can works in a constant power output, without being affected by voltage fluctuation.
2.Preform loading, bottle fetching and outputting
All the preform loading and bottle fetching and outputting movements are finished by mechanical transfer arms, which avoid contamination.
3.Changemoulds
The whole moulds changing takes only one hour.
4.Highautomation, low contamination
Fully enclosed design, finished bottle is transferred by mechanical arms and conveying belt, the whole production process avoids human contact, thus ensuring a healthy and cleaning environment which meets national health standards.
5.Stableand reliable performance
All the important parts, such as electric and pneumatic components, seals, bearings, and reducers, etc., are European or Japanese brands, ensuring a high qualified machine and reliable performance.
6.Human-machineInterface
Taiwan EV HMI, with a variety of parameters setting function, is easy to operate. Operators can modify the parameters while the machine is running, such as the pre-blowing, second blowing, blowing time, etc.
7.Easymaintenance
PLC communicates with machine. User can control every movement of the machine through this PLC. Once there is a failure, machine will alarm and display the problem. Operator can easily find the reason and solve the problem.
Longbow brand automatic linear blowing machine main technical parameters
Model TBL-2000 TBL-4000 TBL-6000 TBL-8000
Type Automatic Automatic Automatic Automatic
Yield 2,000 pcs 4,000 pcs 6,000 pcs 8,000 pcs
PLC sys. SIEMENS SIEMENS SIEMENS SIEMENS
Actuator sys. MITSUBISHI MITSUBISHI MITSUBISHI MITSUBISHI
Operating system Touch screen Touch screen Touch screen Touch screen
Power Sylinder SMC SMC SMC SMC
Bottle size range Up to 1.5 L Up to 1.5 L Up to 1.5 L Up to 1.5 L
The main motor 40 kw 60 kw 60 kw 80 kw
Dimensions (mm) 2155×1750×2120 3280×1750×2200 5500×2200×2130 7280×3550×2200
Weight 3.5 T 5 T 6.5 T 10 T



Hot Filling Pet Bottle Automatic Blower

Hot Filling Pet Bottle Automatic Blower

Hot Filling Pet Bottle Automatic Blower
Hot Filling Pet Bottle Automatic Blower
Packaging&Shipping

Hot Filling Pet Bottle Automatic Blower
Hot Filling Pet Bottle Automatic Blower

 

High Speed Embroidery Machine

Computerized Embroidery Machine,Flat Cording Embroidery Machine,Embroidery Machine

Baolun Computerized Embroidery Machinery Co., Ltd. , http://www.cnembroiderymachine.com