High quality tungsten carbide hexagon wire drawing dies

Applications:

We Die's wire drawing system is used by wire producers to reduce a cross-section of wire by pulling the wire through a single die or a series of drawing dies. There are many applications for wire drawing, including electrical wiring, construction reinforcement, cables, medical and surgical applications, springs, staples, tire cord,and welding wire.

Welding Wire

Enough welding wire is produced every year to circle the globe several times. Hundreds of thousands of wire drawing dies are consumed during the production of welding wire.

Tire Cord

There are more than 1 billion tires produced every year and each tire contains bands of high tensile-strength steel wire encased in a rubber compound. Millions of wire dies are consumed each year in the production of tire cord wire.

Spring Wire

Millions of heavy duty and light vehicle engine valve, piston, fuel injection, transmission, and clutch springs are produced each year. Hundreds of thousands of wire drawing dies are consumed annually during the production of spring wire.

PC Strand

PC strand is primarily used in pre-stressed concrete buildings, bridges, parking decks, and other structures. High carbon steel rod is drawn through carbide wire dies before being used as concrete reinforcement.

Fasteners

All over the world millions of screws, bolts, nuts, rivets, nails, and staples are produced each year. Carbide wire drawing dies are essential to the production of these fasteners.

Wire Rope / Cable

Wire rope and cable are used in many industries - spanning aerospace and construction to medical and transportation. Wire drawing dies are used to form the control, constraint, and security cables used in these industries.

Specifications

 

1. Dies for drawing metal wires

2. Dies for rods.

3. Dies for tubes.

4. Dies for plugs.

5. Non-standard drawing dies
 

YG6 YG8 YG6X YG15

The tungsten carbide drawing die adopts high-quality hard alloy as its core, with high hardness, good thermal conductivity, and low friction coefficient. In the process of using, it shows good corrosion resistance and impact resistance, and applicable to the drawing of black metal, large size wire, and which the drawing condition is worse. YG6 tungsten carbide wire rod drawing die.

A wide selection of types. Various of grades such as: 

 

In order to the use of tungsten carbide drawing dies more efficient, there are five points for attention: 

1.       the choice of equipment

2.      pretreatment of wire material

3.      choosing appropriate lubricant

4.       exception handing

5.      change fossilized dies in time

Company Informations
About Lihua Cemented Carbide 
 

Established in 1990, specialized in production carbide products more than 20 years and located in zhuzhou city  which is the hometown of tungsten carbide in China .
Our products sold well to worldwide, has been build a long term relationship with our customers from Italy, Portugal, German, Turkey, USA, Mexico, India, Australia, South Africa etc .

Main Products
Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Cusomized cutter:woodworking tool, V-cutter, textile cutter, shoes cutter ects. Any kinds of customized carbide products .

Monthly Capacity of 15Ton
We have sophisticated equipments, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine ect, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks.

Strictly QC
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.

Shipping
We normally will dispatch your order within 2-10 working days depends on stock level, as soon as the order is shipped, we will list the tracking number on your order detail page, if there is any problem regarding to the shipping, please feel free to contact us. 

Below shows the estimate delivery time for different courier:
TNT: 10-14 working days 
DHL: 7-10 working days 
FedEx: 8 to 10 working days 
UPS: 7 to 10 working days 
EMS: 10-14 working day

High quality tungsten carbide hexagon wire drawing dies

Applications:

We Die's wire drawing system is used by wire producers to reduce a cross-section of wire by pulling the wire through a single die or a series of drawing dies. There are many applications for wire drawing, including electrical wiring, construction reinforcement, cables, medical and surgical applications, springs, staples, tire cord,and welding wire.

Welding Wire

Enough welding wire is produced every year to circle the globe several times. Hundreds of thousands of wire drawing dies are consumed during the production of welding wire.

Tire Cord

There are more than 1 billion tires produced every year and each tire contains bands of high tensile-strength steel wire encased in a rubber compound. Millions of wire dies are consumed each year in the production of tire cord wire.

Spring Wire

Millions of heavy duty and light vehicle engine valve, piston, fuel injection, transmission, and clutch springs are produced each year. Hundreds of thousands of wire drawing dies are consumed annually during the production of spring wire.

PC Strand

PC strand is primarily used in pre-stressed concrete buildings, bridges, parking decks, and other structures. High carbon steel rod is drawn through carbide wire dies before being used as concrete reinforcement.

Fasteners

All over the world millions of screws, bolts, nuts, rivets, nails, and staples are produced each year. Carbide wire drawing dies are essential to the production of these fasteners.

Wire Rope / Cable

Wire rope and cable are used in many industries - spanning aerospace and construction to medical and transportation. Wire drawing dies are used to form the control, constraint, and security cables used in these industries.

Specifications

 

1. Dies for drawing metal wires

2. Dies for rods.

3. Dies for tubes.

4. Dies for plugs.

5. Non-standard drawing dies
 

YG6 YG8 YG6X YG15

The tungsten carbide drawing die adopts high-quality hard alloy as its core, with high hardness, good thermal conductivity, and low friction coefficient. In the process of using, it shows good corrosion resistance and impact resistance, and applicable to the drawing of black metal, large size wire, and which the drawing condition is worse. YG6 tungsten carbide wire rod drawing die.

A wide selection of types. Various of grades such as: 

 

In order to the use of tungsten carbide drawing dies more efficient, there are five points for attention: 

1.       the choice of equipment

2.      pretreatment of wire material

3.      choosing appropriate lubricant

4.       exception handing

5.      change fossilized dies in time

Company Informations
About Lihua Cemented Carbide 
 

Established in 1990, specialized in production carbide products more than 20 years and located in zhuzhou city  which is the hometown of tungsten carbide in China .
Our products sold well to worldwide, has been build a long term relationship with our customers from Italy, Portugal, German, Turkey, USA, Mexico, India, Australia, South Africa etc .

Main Products
Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Cusomized cutter:woodworking tool, V-cutter, textile cutter, shoes cutter ects. Any kinds of customized carbide products .

Monthly Capacity of 15Ton
We have sophisticated equipments, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine ect, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks.

Strictly QC
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.

Shipping
We normally will dispatch your order within 2-10 working days depends on stock level, as soon as the order is shipped, we will list the tracking number on your order detail page, if there is any problem regarding to the shipping, please feel free to contact us. 

Below shows the estimate delivery time for different courier:
TNT: 10-14 working days 
DHL: 7-10 working days 
FedEx: 8 to 10 working days 
UPS: 7 to 10 working days 
EMS: 10-14 working day

Wadding Machines

Polyester Wadding Machines,Vibrating Feeder Machine,Nonwoven Machine ,Non Woven Fabric Machine

Changshu Tianli Nonwoven Equipment Co., Ltd. , https://www.tianli-machinery.com