Dustproof cover will be wrapped in the brake disc, so as to avoid sediment, dust pollution brake disc, brake disc protection, so as to ensure the brake performance and service life of the brake disc, to ensure the safety of automobile braking.
The company advocates "integrity, enthusiasm, pragmatic, innovation, cooperation, win-win" business purposes, our product quality is excellent, sales attitude enthusiasm. If buyers can't find the product they want here, they can contact us. If time permits, we can support mold production. Rear Axle Mudguard,Cars And Trailers Axle Mudguard,The Truck Rear Axle Mudguard,Truck Trailer Rear Mudguards Linzhou ChengDeshun Machinery Foundry Co., Ltd. , https://www.cdswheels.com
100MW Yearly Production PMG Manufacturer From Rare Earth Origin
Â
About 80% world rare earth reserves was in Baotou,which provide us with abundant permanent material.We also have a strategic cooperation with the BGM to insure good quality and reasonable cost of PMG in mass production.
Tianlong Generator have invested 50 million RMB to set a new industrial base ,with a factory and a R&D center building covering 10000 area .The yearly PMG production will increase to 100MW,and Tianlong Generator will be the largest permanent magnet generator manufacturer in China small and medium wind turbine industry.
Â
Professional Wind Turbine Generator Manufacturer
Â
With the Tianlong Generator range of Permanent Magnet Generator PMG's for small wind turbines based on permanent magnet technology, you will have a different experience:
Low Cogging : Based on optimum pole slot configuration , The starting torque is 40% lower than  national Standard .and could be 1% of the rated torque .
High Effiency: Based on optimum winding design ,low current density makes less copper loss, we can offer an efficiency 10% higher than national standard and can be in excess of 95%. Â Â
Tianlong Generator offers a variety of possibilities of mechanical size, RPM, power rating etc,and The PMG can be operated with a wide range of output power.
Let us help you implementing our Permanent Magnet Generators in your small wind turbines.
Â
Â
Quality Guarantee
Â
The stator and rotor of generator apply high grade cold rolling silicon sheet, with high intensity and characteristic of uneasily deformed; the stator windings are wound with 180 grade combing paintcoat series enamel-cover round copper wire, especially it is impregnated by the techniques of combing process of vacuum constant temperature and constant heat, it has elevated insulation grade .We apply high quality 40SH,42SH,40UH rare-earth NdFeB(Neodymium Iron Boron) Magnet to our generator. The fastness of magnet steel of rotor adopt inlaid type process, strong adhesives splicing ,furthermore epoxy resin encapsulating technology which increase stability and corrosion resistance of magnet. We choose professional completely-enclosed NSK,NTN,SKF,C&U bearings and nickle plated 40Cr steel shaft with quenching and tempering treatment,the outer frame  is Zinc plated  with anti-corrosion treatment.We believe high quality material and advanced craft is the firm guarantee of the high quality products. Â
Â
                                        Technical Details
Rated Power(KW):
20
Rated Speed(RPM):
375
Rated Torque(N*M):
566
Rated Voltage(V):
AC400
Rated Current(A):
28.87
Insulation Class:
F
Efficiency(>%)
90
PMGÂ Collocation:
Y Connection,Three Phase Three Wires, Alternator
Service Life:
More Than 20 yearsMore Than 20 years
Working Environment
-25ºC --40 ºC
Speed Range
0-450rpm
Mechanical Details
Mounting Means:
Horizontal
Weight(Kg):
322
Start Torque( 8.19
Material Details
Shaft Material
45#
Bearing
C&U or for your order
Shell Material
Steel
Winding Temperature Class
150ºC
Permanent Magnet Material
Rare Earth NdFeB
Permanent Magnet Material Temperature Class
150ºC
Core
High Grade Cold Rolling Silicon Sheet   50WW470
Protection Grade
IP54
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Tianlong --- Professional Permanent Magnet Generator ManufacturerÂ
 Tianlong Generator offers different kinds of PMGs ranging from 50W to 1MW, with speed range from 50rpm to 3000rpm. The Tianlong PMGs can be designed with an inner or outer rotor construction. Each PMG topology is designed to best match specific usage, such as wind, hydro or any power that can drive PMGs, and meet any customized requirements. By eliminating cogging, we reduce mechanical stress, improve reliability and extend the PMGs overall lifetime. Thanks to the improved density, a PMG is compact and lightweight, leading to greater flexibility with limited space restrictions.
Advantages of Tianlong PMG:
   • Very low start-up torque
  • Gearless, direct drive, low RPM Generator
  • High efficiency - more than 95%
  • Excellent Heat prevention
  • High overload capability
  • From 50W to 1000 KW Customized PMG
  • Software simulation design
  • High quality material
  • Long service life for more than 20years
Production Range Manufactured by Tianlong:
Â
Rated Power
Rated Speed Range
Rated voltage
0.1kW
100rpm-600rpm
14V/28V
0.2kW
100rpm-600rpm
14V/28V
0.3kW
100rpm-600rpm
14V/28V
0.5kW
100rpm-600rpm
28V/56V
0.8kW
100rpm-600rpm
28V/56V
1kW
50rpm-750rpm
28V/56V
2kW
50rpm-750rpm
56V/115V
3kW
50rpm-750rpm
115V/230V
5kW
50rpm-750rpm
230V-400V
10kW
50rpm-750rpm
230V-400V
15kW
50rpm-750rpm
400V
20kW
50rpm-750rpm
400V
30kW
50rpm-750rpm
400V
50kW
50rpm-750rpm
400V
75kW
50rpm-750rpm
400V
100kW
50rpm-750rpm
400V/690V
200kW
50rpm-750rpm
400V/690V
300kW
50rpm-750rpm
400V/690V
500kW
50rpm-750rpm
400V/690V
1MW
100rpm-200rpm
690V
Quality Control
 • High grade cold rolling silicon sheet .
 • H class insulation, vacuum pressure impregnation.
 • High quality 40SH,42SH,40UH rare-earth NdFeB
 • Shaft & case with anti-corrosion treatment
 • Production process management
 • National certificated direct-drive test station
  
FAQ
1. How your permanent magnet generator work?Â
A: driven by any energy e.g. wind power, hydro power, wave etc.
2. What is the power of your generator?
A: We can manufacture from 100w to 5000kw.
3. What is the rotate speed of your generator?Â
A: From 50rpm to 3000rpm.
4. Can you manufacture customized product?
A: Sure. Please provide your detailed requirements and technical demand, we make design according to your according to your actual need.
5. Do you provide OEM service?
A: Yes, we do. We are a decade year of permanent magnet generator manufacturer.
Any details about Tianlong product catalogue and company instruction, please check at offical web address:
Made in China address: https://tianlongxny.en.made-in-china.com
Offical address: http://www.tianlongpmg.com
Alibaba website: https://bttlycdjc.1688.com
Â
100MW Yearly Production PMG Manufacturer From Rare Earth Origin
Â
About 80% world rare earth reserves was in Baotou,which provide us with abundant permanent material.We also have a strategic cooperation with the BGM to insure good quality and reasonable cost of PMG in mass production.
Tianlong Generator have invested 50 million RMB to set a new industrial base ,with a factory and a R&D center building covering 10000 area .The yearly PMG production will increase to 100MW,and Tianlong Generator will be the largest permanent magnet generator manufacturer in China small and medium wind turbine industry.
Â
Professional Wind Turbine Generator Manufacturer
Â
With the Tianlong Generator range of Permanent Magnet Generator PMG's for small wind turbines based on permanent magnet technology, you will have a different experience:
Low Cogging : Based on optimum pole slot configuration , The starting torque is 40% lower than  national Standard .and could be 1% of the rated torque .
High Effiency: Based on optimum winding design ,low current density makes less copper loss, we can offer an efficiency 10% higher than national standard and can be in excess of 95%. Â Â
Tianlong Generator offers a variety of possibilities of mechanical size, RPM, power rating etc,and The PMG can be operated with a wide range of output power.
Let us help you implementing our Permanent Magnet Generators in your small wind turbines.
Â
Â
Quality Guarantee
Â
The stator and rotor of generator apply high grade cold rolling silicon sheet, with high intensity and characteristic of uneasily deformed; the stator windings are wound with 180 grade combing paintcoat series enamel-cover round copper wire, especially it is impregnated by the techniques of combing process of vacuum constant temperature and constant heat, it has elevated insulation grade .We apply high quality 40SH,42SH,40UH rare-earth NdFeB(Neodymium Iron Boron) Magnet to our generator. The fastness of magnet steel of rotor adopt inlaid type process, strong adhesives splicing ,furthermore epoxy resin encapsulating technology which increase stability and corrosion resistance of magnet. We choose professional completely-enclosed NSK,NTN,SKF,C&U bearings and nickle plated 40Cr steel shaft with quenching and tempering treatment,the outer frame  is Zinc plated  with anti-corrosion treatment.We believe high quality material and advanced craft is the firm guarantee of the high quality products. Â
Â
                                        Technical Details
Rated Power(KW):
20
Rated Speed(RPM):
375
Rated Torque(N*M):
566
Rated Voltage(V):
AC400
Rated Current(A):
28.87
Insulation Class:
F
Efficiency(>%)
90
PMGÂ Collocation:
Y Connection,Three Phase Three Wires, Alternator
Service Life:
More Than 20 yearsMore Than 20 years
Working Environment
-25ºC --40 ºC
Speed Range
0-450rpm
Mechanical Details
Mounting Means:
Horizontal
Weight(Kg):
322
Start Torque( 8.19
Material Details
Shaft Material
45#
Bearing
C&U or for your order
Shell Material
Steel
Winding Temperature Class
150ºC
Permanent Magnet Material
Rare Earth NdFeB
Permanent Magnet Material Temperature Class
150ºC
Core
High Grade Cold Rolling Silicon Sheet   50WW470
Protection Grade
IP54
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Tianlong --- Professional Permanent Magnet Generator ManufacturerÂ
 Tianlong Generator offers different kinds of PMGs ranging from 50W to 1MW, with speed range from 50rpm to 3000rpm. The Tianlong PMGs can be designed with an inner or outer rotor construction. Each PMG topology is designed to best match specific usage, such as wind, hydro or any power that can drive PMGs, and meet any customized requirements. By eliminating cogging, we reduce mechanical stress, improve reliability and extend the PMGs overall lifetime. Thanks to the improved density, a PMG is compact and lightweight, leading to greater flexibility with limited space restrictions.
Advantages of Tianlong PMG:
   • Very low start-up torque
  • Gearless, direct drive, low RPM Generator
  • High efficiency - more than 95%
  • Excellent Heat prevention
  • High overload capability
  • From 50W to 1000 KW Customized PMG
  • Software simulation design
  • High quality material
  • Long service life for more than 20years
Production Range Manufactured by Tianlong:
Â
Rated Power
Rated Speed Range
Rated voltage
0.1kW
100rpm-600rpm
14V/28V
0.2kW
100rpm-600rpm
14V/28V
0.3kW
100rpm-600rpm
14V/28V
0.5kW
100rpm-600rpm
28V/56V
0.8kW
100rpm-600rpm
28V/56V
1kW
50rpm-750rpm
28V/56V
2kW
50rpm-750rpm
56V/115V
3kW
50rpm-750rpm
115V/230V
5kW
50rpm-750rpm
230V-400V
10kW
50rpm-750rpm
230V-400V
15kW
50rpm-750rpm
400V
20kW
50rpm-750rpm
400V
30kW
50rpm-750rpm
400V
50kW
50rpm-750rpm
400V
75kW
50rpm-750rpm
400V
100kW
50rpm-750rpm
400V/690V
200kW
50rpm-750rpm
400V/690V
300kW
50rpm-750rpm
400V/690V
500kW
50rpm-750rpm
400V/690V
1MW
100rpm-200rpm
690V
Quality Control
 • High grade cold rolling silicon sheet .
 • H class insulation, vacuum pressure impregnation.
 • High quality 40SH,42SH,40UH rare-earth NdFeB
 • Shaft & case with anti-corrosion treatment
 • Production process management
 • National certificated direct-drive test station
 Â
FAQ
1. How your permanent magnet generator work?Â
A: driven by any energy e.g. wind power, hydro power, wave etc.
2. What is the power of your generator?
A: We can manufacture from 100w to 5000kw.
3. What is the rotate speed of your generator?Â
A: From 50rpm to 3000rpm.
4. Can you manufacture customized product?
A: Sure. Please provide your detailed requirements and technical demand, we make design according to your according to your actual need.
5. Do you provide OEM service?
A: Yes, we do. We are a decade year of permanent magnet generator manufacturer.
Any details about Tianlong product catalogue and company instruction, please check at offical web address:
Made in China address: https://tianlongxny.en.made-in-china.com
Offical address: http://www.tianlongpmg.com
Alibaba website: https://bttlycdjc.1688.com
Â
I am very familiar with the foreign trade process, and have provided good support for foreign trade companies in logistics, port transportation, packaging and other aspects, ensuring the safety, perfection and convenience of goods inventory.
Price advantage is obvious, our company will provide preferential prices, reliable product quality, so that dealers and company customers are satisfied.
Delivery time: depends on order quantity and time. Specific efforts made to meet customer requirements.
Terms of payment: cash on delivery. Or you can pay part of the deposit and the balance before delivery.
FF-20kw/375rpm/AC400V Permanent Magnet Generator (PMG/PMA/Hydro)
Model NO.: FF-20KW/375rpm/AC400V
Trademark: Tianlong Generator
Specification: GB/T 10760.1-2003 GB/T 25389.1-2010
Origin: Baotou, Inner Mongolia, China
HS Code: 8501610000
Model NO.: FF-20KW/375rpm/AC400V
Trademark: Tianlong Generator
Specification: GB/T 10760.1-2003 GB/T 25389.1-2010
Origin: Baotou, Inner Mongolia, China
HS Code: 8501610000