Water Source Heat Pump
♦ Tube in tube heat exchanger
Water Source Heat Pump Water Source Heat Pump,Water Source Heat Pump Unit,Packaged Water Source Heat Pump,Heating Cooling Heat Pump System Jinan Amrta Air Conditioning Co.,Ltd , https://www.amrtaac.com
1. Machine structure:
A, All frame are welded by 16/20mm steel plate with high machine legs, greatly improve machines' stronger;
B, High machine legs made by strong "H" type profile. Which is easy for operator to collect products;
2. Filling system: Adopt normal pressure\vacuum and high pressurized filling, hopper controlled by level sensor with double rotation chamber discharge, and 44 filling outlet;
3. Steam system: Adopt balance PID control valve with Germany gauge, greatly improve accurate steam, and reduced consumption;
4. Cooling system: Big vacuum pump with vertical tank, equip with vertical vacuum cooling water spray on the top, steam outlet has air\water separator, all these keep very high efficiency;
5. Drainage system: Increased large inlet and outlet of mould, adopts 8- 1" outlet for steam, keep fast cycle time, 8-2" outlet for drainage system, keep fast drainage; And 6" big drainage pipe controlled by butterfly valve, greatly increased fast steam and fast drainage operation;
6. Control system:
A, Adopts PLC(Japan Mitsubishi) and touch screen (French Schneider) with easily operation;
B, All electronic components adopts famous brand(Schneider, Omron, Germany gauge), greatly increased stable;
C, The air cooling\steam\de-mould\pressure of filling controlled by long-distance adjustable and balance valve control.
Number
Items
Type\Unit
Type\Unit
EPSBE1200
1
Chamber Size
Diameter
mm
mm
1200
Height
mm
mm
1800
2
Chamber Vol
m3
m3
1.9
3
Steam Inlet DN
mm
mm
50
4
Air-Compressed Inlet DN
mm
mm
25
5
Steam Pressure
Mpa
Mpa
0.3-0.8
6
Air-Compressed Pressure
Mpa
Mpa
0.5-0.8
7
Power
kw
kw
16.3
8
Control Mode
Electronic computation
9
Drying Way
Foaming Tank Drying
10
Foaming Density
kg/m3
kg/m3
11-50
11
Capacity
kg/h
kg/h
400-600
12
Max. Contour Size
mm
mm
7500× 3150× 3800
13
Machine Weight
kg
kg
3800
1. Machine structure:
A, All frame are welded by 16/20mm steel plate with high machine legs, greatly improve machines' stronger;
B, High machine legs made by strong "H" type profile. Which is easy for operator to collect products;
2. Filling system: Adopt normal pressure\vacuum and high pressurized filling, hopper controlled by level sensor with double rotation chamber discharge, and 44 filling outlet;
3. Steam system: Adopt balance PID control valve with Germany gauge, greatly improve accurate steam, and reduced consumption;
4. Cooling system: Big vacuum pump with vertical tank, equip with vertical vacuum cooling water spray on the top, steam outlet has air\water separator, all these keep very high efficiency;
5. Drainage system: Increased large inlet and outlet of mould, adopts 8- 1" outlet for steam, keep fast cycle time, 8-2" outlet for drainage system, keep fast drainage; And 6" big drainage pipe controlled by butterfly valve, greatly increased fast steam and fast drainage operation;
6. Control system:
A, Adopts PLC(Japan Mitsubishi) and touch screen (French Schneider) with easily operation;
B, All electronic components adopts famous brand(Schneider, Omron, Germany gauge), greatly increased stable;
C, The air cooling\steam\de-mould\pressure of filling controlled by long-distance adjustable and balance valve control.
Number
Items
Type\Unit
Type\Unit
EPSBE1200
1
Chamber Size
Diameter
mm
mm
1200
Height
mm
mm
1800
2
Chamber Vol
m3
m3
1.9
3
Steam Inlet DN
mm
mm
50
4
Air-Compressed Inlet DN
mm
mm
25
5
Steam Pressure
Mpa
Mpa
0.3-0.8
6
Air-Compressed Pressure
Mpa
Mpa
0.5-0.8
7
Power
kw
kw
16.3
8
Control Mode
Electronic computation
9
Drying Way
Foaming Tank Drying
10
Foaming Density
kg/m3
kg/m3
11-50
11
Capacity
kg/h
kg/h
400-600
12
Max. Contour Size
mm
mm
7500× 3150× 3800
13
Machine Weight
kg
kg
3800
Cooling capacity: 10kW-130kW.
Characteristics
1.Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
2.Hermetic compressor. Single phase (mod. 10, 12,15) and 3-phase (mod.17 to 130) scroll type compressors, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
3.Evaporator. High efficiency plate type heat exchanger, factory insulated with flexible close cell material.
4.Condenser. High efficiency plate type heat exchanger, factory insulated with flexible close cell material.
5.Desuperheater High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material.
6. Refrigerant circuit. Copper tube connection with charge valves, filter drier, thermostatic expansion valve (capillary for mod.10 to 15), gas-liquid separator, high pressure switch and low pressure switch. The heat pump units are complete also with 4-way valve and one way valve.
7.Hydraulic circuit. Built with user side and source side water inlet/outlet connectors, water discharge connectors, air vent valve (mod.10 to 30 the user side is complete also with expansion vessel, water pump and flow switch. )
8. Electric panel. Consists of:
♦ Compressor contactor
♦ Compressor protection breaker
♦ User side water pump contactor (for mod.10 to 30)
♦ User side water pump breaker (for mod.10 to 30)
♦ Microprocessor with function display
9.Optional
♦ Sight glass which must be installed in factory
♦ Source side flow switch
♦ Source side water pump
♦ Anti-vibration rubber
♦ Metallic filter for the water circuit
♦ Heat recovery exchanger
EPS Pre-Expander
The EPS shape moulding machine has many improvements compare to the basic type shape molding machine and the features are as follows:
The EPS shape moulding machine has many improvements compare to the basic type shape molding machine and the features are as follows: