1. It is a high automatic in-line type PMB producing plant. The whole equipment adopts container frame structure and modular design, easy assemble and convenient transportation. The unique in-line producing technology can satisfy the working site concentration, high strength and intensive production requirements. Advanced [one-pass" mill ensure the PMB good quality. Independent control room, optional automatic / manual control.
PMB Plant,Modified Asphalt Plant,Asphalt Device,Emulsified Asphalt Device BituRock Science & Technology (Jiangsu) CO., LTD , https://www.biturockplant.com
It turned out that the electric car accidentally turned over when turning, the two wires were broken, and the battery could not be directly charged. After the original electric energy is used up, the electric car is put aside. Recently, he sent the electric car to the repair shop for repair. After the repairman connected the broken wire, he measured it with a universal meter. The voltage across the battery was only 2 volts, and the normal value was 12 volts. Basic retirement.
The car repairer said that electric vehicle users should use the correct method to maintain the battery to increase its service life. The battery cannot be stored in a deficient state, otherwise it will be prone to sulphation, resulting in insufficient charging and a decrease in battery capacity. If the electric vehicle is not used for a long time, the battery cannot be "fake", and it must be fully charged once a month. In addition, when cleaning the electric vehicle, do not directly wash the car body with water, otherwise it may cause the coil and other short-circuit to burn.
Electric vehicles do not need batteries for a long time to charge once a month
"I can't recharge, this group of lead-acid batteries is scrapped!" The electric car that was "injured" two months ago was sent to repair, but found that its core components have deteriorated.