Conductive Quick Connector with double seal ring radial seal structure, rubber modified by O - ring, mainly for fluid and the physical, chemical properties of custom, prevent aging, corrosion, swelling; O - ring have intermediate spacer ring separated, two sealing rings of the corresponding event space, the rubber matrix bonding does not occur, the external O-ring using synthetic rubber, enhanced mechanical properties, prevent air aging. Sealing ring and a spacer ring through the outer ring of the elastic bayonet device firmly fixed in the shell, does not produce seal off and shift phenomenon produced. Greatly ensure the safety of the seal.
Quick connector composed of a connector housing, O - ring, O - ring, a spacer ring, outer ring, a self-locking buckle, when another pipe adapter (male connector) insert joint, because of the self-locking buckle has certain elasticity with buckle fastener can connect the two connectors together, then pulled back, ensure that the installation in place so fast joint can play a role. Disassembly and maintenance as long as the first to promote the positive joint and press and hold the self-locking buckle at both ends of the buckle buttons, the self-locking expansion in the middle, you can easily pull out the connector, re connect forward should use SAE 30, heavy oil lubrication.
The electric conduction fast joint is mainly in the medium of methanol gasoline and ethanol gasoline.. It has the overall structure, the best sealing effect. Can work under pressure 10bar. The engine area temperature is suitable for the short time of the -40 up to +110 to reach the +150 degree (about half an hour).
Conductive Quick Connector,Conductive Connector,Automotive Fuel Line Quick Connector Linhai Shinyfly Auto Parts Co.,Ltd. , https://www.chinashinyfly.com
With the cold chain construction entering a peak, the investment in refrigeration equipment will drive the performance of related listed companies. The use of cooling towers as refrigeration equipment in the pharmaceutical production process has become increasingly widespread.
The cooling tower prevents debris from entering the cooling piping system and the cooling medium. Use soft water as a cooling medium, no scaling, no blocking of pipes, and less failure. Using air-cooled and spray-water evaporation heat-absorbing double cooling method, the cooling medium is completely closed and circulated. Cooling efficiency is high. The device is small in size, occupies a small space, is convenient to move and place, and does not require the construction of a pool.
Using automatic intelligent control, the cooling mode can be automatically changed according to operating conditions, and the operation is simple and reliable. Wide use, can directly quench the quenching fluid, oils, alcohols and other non-corrosive media to the heat exchanger, the media is lossless, the composition is stable. The cooling tower fan solves the waste heat problem in the production process and ensures efficient and safe production.
Safe production is the foundation for the existence of an enterprise. Energy conservation is an unavoidable topic for the development of the enterprise. To ensure the orderly production, the refrigeration system will tend to be more secure and energy-efficient in the future. Enterprises should integrate various technologies and continuously optimize the refrigeration system so that Customers get the most value from system use.
With the continuous development and progress of information technology, high-speed automation must be the direction of development for refrigeration systems. Computers are used instead of labor to achieve equipment management to achieve safety and energy conservation. Therefore, the industry must continue to commit itself to the research and development of environmentally friendly alternative refrigerant technologies and fundamentally solve the problems.
China's cooling tower industry ushered in a good development prospects China's cooling tower market started late, but the development of stable growth, with the development of production technology and awareness of environmental protection, its potential industry and many users, the market is very broad development space. After joining the WTO, in order to better participate in international competition, and in line with international standards, the state has systematically adjusted and restructured the cooling tower industry on a large scale, including the formation of a large group combining production, education and research.
In order to save energy, large-scale cooling towers mostly use natural draft cooling towers. They consist of a ventilator, a herringbone, a ring base, a showering device, and a tower core material. With the development of new materials, new processes, improvement of specifications, and continuous improvement of users' requirements for the use of cooling towers, there will be more and more products that meet the needs of the times, and have good performance and convenient selection. It can be seen that the cooling tower will be an energy-saving device that is indispensable for customers in the market.
In recent years, the country has continuously introduced high-tech high-quality cooling tower products, and it is necessary to make computerized and modularized design and selection of wet and dry cooling towers, quotation, and cost management, and to use the price advantages of domestic products. Can occupy the domestic market, and it is also possible to go abroad to the world.
China's cooling tower industry should promptly establish a technology exchange platform to promote the technical exchanges between enterprises. Purify the cooling tower market, improve the competition mechanism, and continuously develop and innovate, so that China's cooling towers occupy the domestic market and go abroad to occupy the foreign market.
The crisis in China's cooling tower manufacturing industry has long been not one or two days. Experts are saying that economists are predicting that with the turmoil in the world economic situation, China's cooling tower manufacturing industry has experienced various difficulties. According to economist Lang Xianping.
The crises in China's cooling tower manufacturing industry are mainly reflected in the following points:
Distorted ice and fire two days. On the one hand, the real economy is sluggish, and the stock market and the market are all sluggish. In sharp contrast, high-end real estate, luxury cars, high-end luxury goods, and high-end antique artworks are all in full swing, and false prosperity is in line with actual weakness.
China's cooling tower manufacturing industry is further marginalized, and product R&D and innovation are not sufficient. Although China is a large country with a cooling tower manufacturing industry, it is continuously losing its advantage. Its international discourse right is more declining and it is unable to grasp the most critical pricing power in the international market rules. The cooling tower manufacturing industry's profit is further reduced.
Excessive taxes and fees, high capital costs, and no longer the advantages of labor costs. Repeatedly raising the minimum wage standard throughout the country, the cost of manpower has risen rapidly and the only advantages have disappeared.
The business environment is deteriorating and excess capacity. With the declining world economic situation, the demand for foreign trade has dropped drastically, leading to overcapacity in the country and the investment environment for the cooling tower manufacturing industry has further deteriorated.
In response to the above problems, Lang Xianping's approach is to develop a "smart industry" and to promote the industrial upgrading of China's cooling tower manufacturing industry through "smart industries." The wisdom industry is also known as the "fourth industry" and serves businesses and other industries. In modern development, smart industries belong to the highest-end high-tech and high-tech industries in the pyramid. Its role is comparable to the locomotive and can directly drive the national economy forward.
Cooling tower industry must commit to R&D of environmentally friendly refrigerant replacement technologies
At present, in the context of the urgent need for adjustment and upgrading of the cooling tower manufacturing structure in China, the smart industry has changed the pattern of extensive factory smoke and machine roaring in the past, replacing it with low energy consumption, high efficiency, flexibility, and streamlining. Features have become the key to reducing costs and promoting the development of manufacturing industries.