Construction Hoist with Electric Winch and Engine Blocks

Model NO.: SC100/100
Attendant: Without Attendant
Deceleration Device: With Deceleration Device
Elevator Door: Straight Fractional Door
Mast Section Size: 0.65*0.65*1.508m/0.8*0.8*1.508m
Color: Red
Model: Sc100/100
Brand Name: Runchen
Transport Package: Container Sea Freight Packing, by Container, Nude Packed, Well Fixed
Lifing Speed: 36 M/Min
Trademark: KATOP
Specification: 1.0t load capacity, double cage
Origin: Shandong, China
HS Code: 8428109000
Model NO.: SC100/100
Attendant: Without Attendant
Deceleration Device: With Deceleration Device
Elevator Door: Straight Fractional Door
Mast Section Size: 0.65*0.65*1.508m/0.8*0.8*1.508m
Color: Red
Model: Sc100/100
Brand Name: Runchen
Transport Package: Container Sea Freight Packing, by Container, Nude Packed, Well Fixed
Lifing Speed: 36 M/Min
Trademark: KATOP
Specification: 1.0t load capacity, double cage
Origin: Shandong, China
HS Code: 8428109000

Welcome to Shandong Run Chen Machinery Co., Ltd.
Construction Hoist with Electric Winch and Engine Blocks
Construction Hoist with Electric Winch and Engine Blocks


1. Personnel and materials construction building lifting equipment, construction tool equipment construction hoist of common models:
Characteristic Model Rated Loading Lifting Speed Motor Power
 
Double cabin		 SC200/200 2×2000kg 33m/min 2×(3×11kw)
SC150/150 2×1500kg 33m/min 2×(2×15kw)
SC100/100 2×1000kg 33m/min 2×(2×11kw)
2.  Personnel and materials construction building lifting equipment, construction tool equipment construction hoist with Interver:
Characteristics Rated Loading Lifting Speed Motor Power
 
 
Double Cabin
 		  
Low-speed		 2×2000kg 0-33m/min 2×(3×11kw)
2×1000kg 0-33m/min 2×(2×11kw)
 
Mid-speed		 2×2000kg 0-55m/min 2×(2×11kw)
2×1000kg 0-55m/min 2×(2×11kw)

 
A. Special design for the construction passenger hoist cage: 
The cage is boarded up by all punched aluminium sheet (anti-aging, anti-rust, lightweight and beautiful) or punched steel sheet (stable). The main structure of cage is made of high quality steel after bending. The bended steel is firm, stability, moreover it can ensure stability for the whole structure. 
1. Bottom and roof of cage adopt trapezoidal frame. Bottom and the roof are full symmetry.   
2. The plane of symmetry are connected by Bending plate, bending channel and square pipe which make it firm, straight and balance in use.   
3. The wall around cage can be fixed by punched aluminum plate, punched zinc plate, punched steel plate, steel wire mesh. 
4. Surface treatment: blasting, baking finished, galvanized. 
(Optional Size:3x1.5x2.1m, 3x1.3x2.1m, 3.2x1.5x2.1m, 3.2x1.3x2.1m, 3x1.5x2.4m, 3x1.3x2.4m,  3.2x1.5x2.4m, 3.2x1.3x2.4m etc.)
 
 B. Mast section with rack for the construction passenger hoist :  
I: About the mast section: 
The Mast section (color is variable) is made of seamless tube or HF welded tube. 
1. Steel plates are bented of U-shape to strengthen the mast section. 
2. Mast section with galvanized coat or heat spray coat can be chosen. 
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.   
4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm (Thickness of 6mm or 8mm is also available). 
5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose:  
    450*450*1508mm, 650*900*1508mm,800*800*1508mm  
construction hoist lifting The mast section can be customized according to customers' requirements (drawing, specifications and so on). 
 
 C. Mast section with rack for the construction passenger hoist : 
I: About the mast section: 
The Mast section (color is variable) is made of seamless tube or HF welded tube. 
1. Steel plates are bented of U-shape to strengthen the mast section. 
2. Mast section with galvanized coat or heat spray coat can be chosen. 
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.   
4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm  
(Thickness of 6mm or 8mm is also available). 
5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose:  
    450*450*1508mm, 650*900*1508mm,800*800*1508mm






About our factory:
Katop Group was established in early 1999. We are specialized in research, development, production and marketing of machinery.
As one of the largest equipment professional manufacturer in the world, Katop has seven industrial bases for Construction Machinery, Hoisting Machinery, Concrete Machinery, Agricultural Machinery, Mining Machinery, Port Machinery and Construction Material. Our main products includes Wheel Loader, Bulldozer, Excavator , Tower Crane, Construction Hoist, Concrete Mixer, Concrete Pump, Concrete Mixing Plant, Tractor, Forklift and Construction Material etc. Now we own more than 800,000 square meters workshop, equipped with professional R&D experts and top management personalities. Standard manufacturing procedure, veteran-working staff and advanced testing instruments are the guarantee of our product quality. Our company was certified by ISO, CE, BV, SON, SGS.
Katop Group always takes the philosophy of "Create Customers Value" as priority. Innovated technology, reliable quality and comprehensive after-sale service are our marketing strategies. With past construction manufacturing and management experience, we have gained good reputation in all of the machinery industry. Our products are marketing in more than 30 countries and regions, such as Brazil, Vietnam, Indonesia, Thailand, Korea, Pakistan, India, Mongolia, Peru, Unit Arab Emirates, Russia, Australia, African etc.
Construction Hoist with Electric Winch and Engine Blocks





 Looking forward to cooperation with you, if you interested in our products, please contact with me at any suit time for you.

Contact: Anne Zhang
 Mobile:+0086-18678001598
Website: www.katopgroup.com
 
Welcome to Shandong Run Chen Machinery Co., Ltd.
Construction Hoist with Electric Winch and Engine Blocks
Construction Hoist with Electric Winch and Engine Blocks


1. Personnel and materials construction building lifting equipment, construction tool equipment construction hoist of common models:
Characteristic Model Rated Loading Lifting Speed Motor Power
 
Double cabin		 SC200/200 2×2000kg 33m/min 2×(3×11kw)
SC150/150 2×1500kg 33m/min 2×(2×15kw)
SC100/100 2×1000kg 33m/min 2×(2×11kw)
2.  Personnel and materials construction building lifting equipment, construction tool equipment construction hoist with Interver:
Characteristics Rated Loading Lifting Speed Motor Power
 
 
Double Cabin
 		  
Low-speed		 2×2000kg 0-33m/min 2×(3×11kw)
2×1000kg 0-33m/min 2×(2×11kw)
 
Mid-speed		 2×2000kg 0-55m/min 2×(2×11kw)
2×1000kg 0-55m/min 2×(2×11kw)

 
A. Special design for the construction passenger hoist cage: 
The cage is boarded up by all punched aluminium sheet (anti-aging, anti-rust, lightweight and beautiful) or punched steel sheet (stable). The main structure of cage is made of high quality steel after bending. The bended steel is firm, stability, moreover it can ensure stability for the whole structure. 
1. Bottom and roof of cage adopt trapezoidal frame. Bottom and the roof are full symmetry.   
2. The plane of symmetry are connected by Bending plate, bending channel and square pipe which make it firm, straight and balance in use.   
3. The wall around cage can be fixed by punched aluminum plate, punched zinc plate, punched steel plate, steel wire mesh. 
4. Surface treatment: blasting, baking finished, galvanized. 
(Optional Size:3x1.5x2.1m, 3x1.3x2.1m, 3.2x1.5x2.1m, 3.2x1.3x2.1m, 3x1.5x2.4m, 3x1.3x2.4m,  3.2x1.5x2.4m, 3.2x1.3x2.4m etc.)
 
 B. Mast section with rack for the construction passenger hoist :  
I: About the mast section: 
The Mast section (color is variable) is made of seamless tube or HF welded tube. 
1. Steel plates are bented of U-shape to strengthen the mast section. 
2. Mast section with galvanized coat or heat spray coat can be chosen. 
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.   
4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm (Thickness of 6mm or 8mm is also available). 
5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose:  
    450*450*1508mm, 650*900*1508mm,800*800*1508mm  
construction hoist lifting The mast section can be customized according to customers' requirements (drawing, specifications and so on). 
 
 C. Mast section with rack for the construction passenger hoist : 
I: About the mast section: 
The Mast section (color is variable) is made of seamless tube or HF welded tube. 
1. Steel plates are bented of U-shape to strengthen the mast section. 
2. Mast section with galvanized coat or heat spray coat can be chosen. 
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.   
4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm  
(Thickness of 6mm or 8mm is also available). 
5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose:  
    450*450*1508mm, 650*900*1508mm,800*800*1508mm






About our factory:
Katop Group was established in early 1999. We are specialized in research, development, production and marketing of machinery.
As one of the largest equipment professional manufacturer in the world, Katop has seven industrial bases for Construction Machinery, Hoisting Machinery, Concrete Machinery, Agricultural Machinery, Mining Machinery, Port Machinery and Construction Material. Our main products includes Wheel Loader, Bulldozer, Excavator , Tower Crane, Construction Hoist, Concrete Mixer, Concrete Pump, Concrete Mixing Plant, Tractor, Forklift and Construction Material etc. Now we own more than 800,000 square meters workshop, equipped with professional R&D experts and top management personalities. Standard manufacturing procedure, veteran-working staff and advanced testing instruments are the guarantee of our product quality. Our company was certified by ISO, CE, BV, SON, SGS.
Katop Group always takes the philosophy of "Create Customers Value" as priority. Innovated technology, reliable quality and comprehensive after-sale service are our marketing strategies. With past construction manufacturing and management experience, we have gained good reputation in all of the machinery industry. Our products are marketing in more than 30 countries and regions, such as Brazil, Vietnam, Indonesia, Thailand, Korea, Pakistan, India, Mongolia, Peru, Unit Arab Emirates, Russia, Australia, African etc.
Construction Hoist with Electric Winch and Engine Blocks





 Looking forward to cooperation with you, if you interested in our products, please contact with me at any suit time for you.

Contact: Anne Zhang
 Mobile:+0086-18678001598
Website: www.katopgroup.com
 

Nuts Butter Machine

Work Principle:

The machine is fixed by different geometry, the relative rotation of the rotor under high speed rotation, when the material under the weight, air pressure and centrifugal force through adjustable stator clearance, subject to strong shear , Friction, impact force, high-frequency vibration and other complex forces, are effectively broken, dispersed emulsification and mixing, resulting in the ideal product.

Argan Nut Butter Making Machine,Nuts Grinder Mill,Nuts Milling Machine,Cashew Nuts Grinding Machine

Henan Gems Machinery Co.,Ltd , https://www.gemsmachines.com