Computerized Imitation Buttonhole Sewing Machine

FOXSEW Computerized Imitation Buttonhole Sewing Machine
High speed electronically controlled chainstitch imitation sleeve buttonhole machine designed for sewing purely decorative and non-functional buttonholes on jacket sleeves, the machine is designed primarily for decorative sewing of buttonholes using special threads such as silk thread. The chainstitch imitation sleeve buttonhole machine is programmable to sew automatically up to 8 imitation buttonholes at specific distances between each buttonhole. The machine clamps can be set to sew imitation buttonholes at an angle of 0 to 30 degree from a sleeve cuff. The chainstitch imitation sleeve buttonhole machine is offered with large touch screen display that uses easily understood symbols and graphics to simplify the adjustments. The optional laser lights mark the position of the sleeve at the beginning of sewing cycle. The high sewing speed up to 3800 spm and the short sewing cycle increase productivity and the single pedal electronic start reduces operator fatigue.

Stitches Size, length and distance are electronically controlled.
Through automatic feeder, set of number of eyelet and distance between the eyelets.
LED operation panel.
Embedded integrated control system.
DD Motor direct-drive.
Digitally re-adjustable the up stopping position.
Stitching Buttonholes between 0-30 degrees.
Electronic Stop and Start Motion
Patented Mechanisms
Fully Enclosed Mechanism
Control Panel
Decorative No-Cut Buttonhole
Productivity & Flexibility
Pneumatic Clamping, Cutting and Thread Trimming
Semi-Automatic Lubrication System and Oil Monitor
High Speed Sewing with Reduced Noise Level

Specifications:

Forgings for Engineering Equipment

AVIC EXCELLENCE FORGING is a member and the only forging processing center in east China of AVICHM.We are the professional manufacturer of special shaped ring forgings in China.

We can provide customized service to customers with all kinds of seamless rolled rings, includes:carbon steel forging, alloy steel forging, stainless steel forging, aluminium forging, titanium alloy forging, and super alloy forging.

Our ring forging products are applied to petrochemical equipment,Wind power equipment, nuclear power equipment and other new energy equipment,ocean engineering equipment, mechanized equipment, oil and gas equipment, gas turbine engine, aerospace and military project.

Covers kinds of products:Flange,tube sheet, wind power flange and bearing,gear ring,slewing bearing,yaw pitch bearing, forged rim and so on.We can produce all kinds of high cylinder forging, wide thickness seamless rolled ring, the outer diameter of rolled rings from 600mm to 9000mm,and the height can be reach 1500mm.

AVIC EXCELLENCE FORGING have two forging lines, one line equipped 4000 tons hydraulic pressure machine and OD6300mm rolled ring machine, another line equipped 5000 tons oil pressure machine and OD9000 mm rolled ring machine. The annual capacity of forging manufacture is 60000 tons . We also have over ten sets all kinds of heat treatment furnaces, and could do normalizing, annealing, quenching, tempering, aging, solid solution and so on. The outer diameter of biggest furnace is 8500mm.

AVIC EXCELLENCE FORGING also have over ten sets different size vertical lathes, from 1.6 m to 8 m.At the same time, AVIC Excellence Testing Center is the only testing center of AVIC Metal Test Technology Co. Ltd. a third party service platform of AVIC Industry, very important. And, it is an experienced, capable and highly qualified state-level third party testing platform. We have equipped SPECTRO direct-reading spectrometer, high temperature tensile tester, low temperature impact tester, hardness tester, metallographic testing equipment, ultrasonic fault detector and other Physical and chemical inspection analysis equipment.

AVIC EXCELLENCE FORGING has obtained the ISO9001, IS14001, AS9100, PED, different kinds of classification society certificate, such as CCS, ABS, DNV GL, LR, BV, RINA. At the same time, the establishment of a strict and scientific management system provides the high quality of products.

AVIC EXCELLENCE FORGING relies on the high quality products and thoughtful service to win the trust of the market and the establishment of a lasting relationship with customers.As so far, the company has pioneered in the United States, Brazil, Germany, Belgium, Russia, Turkey, Australia, India, Singapore, South Korea, durban, represented by regional markets such as Europe, America, Oceania, southeast Asia, South Africa.

AVIC EXCELLENCE FORGING is willing to cooperate sincerely with friends from home and abroad, and establish the lasting and mutual trust relations of cooperation,and make brilliant innovation together in future.

Forgings For Engineering Equipment,Engineering Equipment Forgings,Engineering Tools And Equipment Forgings,Equipment And Engineering Tools Forgings

AVIC EXCELLENCE FORGING (WUXI) CO.,LTD. , https://www.avicforging.com