First, Kai pump 1, check the electrical circuit is loose, on-site and remote instruments, control valve is qualified; 2, check the angle bolts, pipelines and flanges are loose, the valve switch is flexible; 3, check the oil chamber oil level (mirror or oil Cup), if necessary, refueling; to ensure that the motor has been joined the appropriate amount of oil (fat); 4, hand rotation coupling 2 to 3 laps, should feel relaxed and light weight uniform, and pay attention to identify the pump there is no friction noise and foreign objects such as rolling noise, if you should try to rule out, and the coupling shield Installed 5, open the cooling water inlet and outlet valve, close the communication valve, observe the circulating cooling water pressure gauge on the line; 6, open the pump suction pipe valve, the liquid filled pump, open the vent valve, turn the coupling, remove the gas pump; check the process pipeline valve should be in the open pump position; 7, close the outlet pipe valve, start the motor; 8, until the pump speed is stable, the ammeter to the specified location, pump pressure gauge indicates the rise, slowly open the outlet pipe valve, adjust the outlet flow according to process requirements. 9, a comprehensive inspection for any anomalies, such as the discovery of serious leakage, vibration, sharp sound, temperature rise is too high, etc., immediately stop the pump. Second, stop the pump: 1, off the pump outlet valve; 2, press the stop pump button, pay attention to the motor lazy go time; 3, close the inlet valve, disconnect with the process (if necessary). Wear-resisting steel plate is composed of low carbon steel plate and alloy wear-resisting layer. When working, the matrix provides comprehensive properties such as strength, toughness and plasticity of resisting external forces, and the alloy wear-resistant layer provides wear-resistant properties that meet the requirements of specified working conditions. Wear Resistant Plate,Abrasion Resistant Steel Plate,Hardox Steel Plate,NM Steel Plate,Wear Resistant Sheet Shandong Guanzhou Iron and Steel Group Co., Ltd , https://www.cnshansteel.com
Wear-resisting steel alloy wear-resisting layer and base plate are metallurgical combination. By means of special equipment and automatic welding process, the high-hardness self-protecting alloy wire is uniformly welded on the substrate, and the composite layers are one to two or even more. In the composite process, due to the different shrinkage ratio of the alloy, uniform transverse cracks appear, which is a significant feature of the wear-resistant steel plate.