The announcement of the national approval of the 5- ton truck crane with digging machine board is relatively small. At present, our company has a Dongfeng 5- ton single-bridge truck crane with digging machine board, which can combine the truck crane and the flatbed truck into one. The following is the introduction of parameters
All kinds of metal scraps, waste steel, copper, aluminum shavings, car shells, etc., is produced every day of production, our hydraulic Metal Baler can compress every kinds of metal leftover materials into qualified charging such as square, cylinder, octagon body and other shaps. It reduces your cost of transporation and smelting. Metal baler machine is mainly suitable for steel recovering and processing industries, ferrous and non-ferrous smelt industries Aluminum Recycling Machine, Steel Recycling Machine, Copper Recycling Machine Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.hydraulicn.com
Product Model CSC5160JSQ
Vehicle parameters
( Length × width × height ) mm9000 × 2480 × 3300
Carriage board size ( length × width × height ) mm
Or volume m3--
Cured mass kg7805 total mass kg15700
Drive type 4X2
Chassis production company Dongfeng Motor Company
Chassis model EQ5161GFJ6
Engine manufacturer Dongfeng Cummins Engine Co., Ltd.
Engine Model B19033
Transmission Model DC6J85TZ
Main Reducer Ratio (Drive Axle Ratio) 6.5
Tire specification models 9.00-20, 9.00R20, 10.00-20, 10.00R20
Comprehensive fuel consumption L/100km26.0
50km/h No-load Constant Speed Fuel Consumption L/100km16.1
Optional sidebar structure , sidebar height 550mm . The car tops optional folding arm crane, crane model, the quality, the maximum lifting weights were: SQ3.2SK2Q, 1316Kg, 3200Kg; SQ4SK2Q , 1350Kg, 4000Kg; SQ5SK2Q, 2074Kg, 5000Kg. Wheelbase / shape length / rear suspension relationship is (mm):4700/8500/2555 , 5100/9000/2655; only B17030, B19030, YC6J170-33, B19033 engine. Side protection is symmetrical with cold-formed channel steel / Q235-A, threaded connection. After protection using cold-formed channel / Q235-A, welded connections, integrally connected to the dedicated device, a cross-sectional width of 50mm, the lower edge of the ground clearance 540mm.
The 20- ton vehicle-mounted crane with a price of 224,000 is well-suited for customers who want to buy excavator boards and truck cranes but are in a tight position.