Car Elevator,Garage Elevator,Passenger Elevator Lefeng Elevator Parts Co., Ltd. , http://www.szelevator.com
Product Description
Permanent Lifting magnet( magnetic lifter) is a manual tool, which is used for lifting or transporting flat, round surfaces steels or other ferrous work pieces . Since it grabs parts by magnet, which will not contact directly, cause no  damage to surface of the part being lifted. Normally it is used with crane.
It is widely used in lifting and transporting finished, half-finished work pieces in factory, dock, warehouse and transportation .
Detailed Technical Specifications
Name: Lifting magnet/magnetic lifter
Main Part Material: Steel
Magnet Material: Nd-Fe-B
Packing: wooden
Coating: Nickel
Rated Capacity:400kgÂ
Tolerance:+/-0.05mm
Certification: CE/ISO9001
Working Temp:-45-+80 Degree
Application: Warehouse Crane Construction Usage
Optional Pulling Force: 100kg ,400kg ,600kg ,1t ,2t ,3t ,4t,5t
Warranty: 12 months
Export Markets: Global
FeaturesExcellent lifting ability by using Nd-Fe-B magnetic material and non-electric, which makes the lifter smaller, lighter ,more compact and have no risk of falling in case of power off. Advanced design of magnet way, no residual magnetism to guarantee accurate operation.The "V" design of bottom makes it able to lift plate, round or spheroidal work pieces.The maximum drop-away force is 3.5 times larger than rated value, making the lifer more safe and high reliability.The professional apparent design makes it more beautiful and friendly to use.Â
Â
Lifting Magnet/Magnetic Lifter Specification Chart
Model
Capacity
(kg)Size (mm)
NW
(kg)GW
(kg)Package
L×W×H (mm)
L
H
B
R
JG-100
100
123
62
67
170
3
4
240×160×160
JG-400
400
195
95
92
210
10
11
320×200×170
JG-600
600
246
120
115
243
20
22
370×230×230
JG-1000
1000
298
153
135
270
36
39
430×280×240
JG-2000
2000
395
172
165
370
70
73
520×300×310
JG-3000
3000
480
175
165
370
88
92
600×300×310
JG-5000
5000
570
230
215
600
198
213
730×400×480
Method of use Before hoisting, check and remove dirt on parts to be hoisted to grantee parts clean and flat. Then put the part under lifting magnet and make lifter's central line coincident with part's center of gravity.Turn the handle lever from "-" to "+" position until it reaches limit pin and check if the safety pin on the lever is at right position. After these steps, the lifter could be lifted(usually by lyfoo).If lifting round parts, the outline of part should contact both the two line of "V" gutter and weight should be no more than 30-50% of lifter's rated lifting capacity.People mustn't stay below lifting magnet and working temperature should not exceed 80 degree, no vibration and impact.After use, press button on handle lever to detach safety pin of step 1. Then turn the lever to "-" position, separate parts and lifter to finish operation.
Maintenance
    1.Read instructions carefully before using. Contact us if any unclear.Â
    2. Avoid collision of lifter's working surface to achieve longer lifespan and better performance.
    3. Check movable parts frequently, if it is not use for a long time, smear anti-rust oil on working surface.
Note !
   Never stand under loading being lifted. Always use extra caution. Only use the lifting magents on material that doesn't on flex or bend.
   The surface of the lift, and the parts being loaded, should keep clean and free of chips, oil,slag,dirt,etc. Lifting magnets must be centered on load parts. Do not recommended for painted or finish coated surfaces.
Contact US
    Contact person: Jake.su(Mr, Sales)
    Phone: +86 180 1049 6004       Â
   Website: http://toyalift.en.made-in-china.com/
   Address: Dong Lv Industry area, BaoDing, HeBei province, China
Â
CE/ISO Standard Permanent Lifting Magnet/Magnetic Lifter 400kg
CE/ISO Standard Permanent Lifting magnet/Magnetic Lifter 400kg