Ce Certificate Sand Stone Washer

 

DXS bucket-wheel sand washing machine is a high efficient sand washing equipment, which is manufactured by using advanced technology from home and abroad according to condition of sand making industry. It is suitable in sand making process of metallurgy, mining, chemical, transportation, hydroelectricity, building materials industries, etc. it is mainly applied to the washing process in sand making industries and also can applied to sand selecting process in mineral separation industry, etc. it features in high clean degree, greater capacity, high efficiency, lower energy consumption, lower material loss, etc.  

 

 

 

• Simple and reasonable structure, which effectively reduce occupation area.
• The isolation design in bearings, sand and water can effectively prevent bearing damage from accessing water, sand and pollutant, which is decreased the malfunction rate.
• The optimized design of transmission part, which is convenient for customer's installation at site. 
• Professional designed guide plate is conductive to scoop up the materials; the reasonable design of screen cloth matched with optimized bucket-wheel revolving speed can ensure diminishing the moisture and impurities to the least extent,
• Lower fine sand and stone powder loss and reached the standard request of building sand's gradation and fineness modulus.
• Reasonable designed discharge chute and outfall, which is convenient for the discharge of material and water.
• Bucket-wheel sand washing machine almost has not bearing part except for screen cloth, which provides the machine with long service life and less maintenance.
• It features in greater capacity, lower power consumption, water saving, non-pollution, green and environment protection. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ATAIRAC is a Sino-French cooperation enterprise. By technically cooperating with the French company ALTAIRAC with a business history over hundred years, ATAIRAC engages in further research&development, manufacture and sale of crushing equipment(Jaw crusher, cone crusher, impact crusher, vsi, feeder, vibrating screen, sand washer, ball mill, grinder, etc). At present, ATAIRAC production base covers over 300000 square meters and has a professional technical team with 20 pre-sale service engineers, 102 process engineers, 65 design engineers, over 500 production engineers, over 60 after sales service engineers. Our production base possesses 100000 tons annual production ability of crushing equipment. Our equipment is widely used in the fields of mining industry, cement industry, concrete and aggregate, refractory industry, chemical industry, etc.  

Services of skilled technician(s) to supervise the assembly, installation, commissioning and train the local operator will be supplied after the seller confirms the preparation for installation is ready in the buyer's site. The buyer should prepare the necessary materials, tools, human labors and offer necessary assistance. The reasonable local cost of the technician(s) during installation period including the accommodation, round-trip ticket, insurance, communication fee, etc. are on the account for the buyer. The buyer should pay 100USD per engineer per day within the first 40 days, and 150 dollars in the following time.

100% brand new when leaving the factory. The seller guarantee quality of the machines  (excluding wearing parts)for a period of one year from the date of trial run finish under our technician's guidence, but not exceed 15 months from date on which machine leaves the factory. 

1. Can you give me a solution and quotation?

Answer: Of course. Kindly please tell us information such as, the capacity? (100t/h, 150t/h, 200t/h......) the raw material ?(limestone, pyrite, granite, basalt......) hardness?(soft stone or hard stone...) maximum feed size ?(300mm,400mm,500mm......) output size ? (0-5mm,5-8mm,8-15mm,15-25mm......) the usage of final products ? (for railway, road construction, building......) We will provide the best solution and quotation.

 

2. Which stone is hard? Which stone is soft?

Answer: These stone are hard usually such as granite, basalt, cobble, etc. These stone are soft usually such as limestone, dolomite, gypsum, etc. Your company can give us analysis report about raw material in order to supply suitable equipment for your company.

 

3. How about the shape of aggregate manufactured by your quarry crusher?

Answer: The shape of aggregate has something to do with design of crusher. The shape also has something to do with design of complete stone production line. Our engineers will design complete stone production line based on raw material. The shape of aggregate will be cube which is better compared to other companies.

 

4. How long is date of delivery ?

Answer: The date of delivery is one month. The date of delivery will be extended if the stone production line is too big or the clients have some special requirement.

 

5. How long is the guarantee period of your sand removal equipment ?

Answer: The guarantee period of our company's equipment is 13 months. Wear resistance parts and problem coursed by worker's unsuitable operation are not included.

 

6. What's the after sale service of your company?

Answer: The construction drawings of foundation will be supplied for our clients. What's more, we will supply installation service, workers training service, etc.

 

7. Can you supply wear resistance parts for us if we buy your company's sand removal equipment ?

Answer: Of course we can supply. We have two our own casting factories and We can supply enough wear resistance parts for our clients in order to guarantee machine operation.

  

8. Can your company's sand removal equipment be used in harsh environment like colder than -10ºC or hotter than 50ºC? 

Answer: Of course. Our equipment adopts XYZ-G lubrication and temperature control system. 

 

DXS bucket-wheel sand washing machine is a high efficient sand washing equipment, which is manufactured by using advanced technology from home and abroad according to condition of sand making industry. It is suitable in sand making process of metallurgy, mining, chemical, transportation, hydroelectricity, building materials industries, etc. it is mainly applied to the washing process in sand making industries and also can applied to sand selecting process in mineral separation industry, etc. it features in high clean degree, greater capacity, high efficiency, lower energy consumption, lower material loss, etc.  

 

 

 

• Simple and reasonable structure, which effectively reduce occupation area.
• The isolation design in bearings, sand and water can effectively prevent bearing damage from accessing water, sand and pollutant, which is decreased the malfunction rate.
• The optimized design of transmission part, which is convenient for customer's installation at site. 
• Professional designed guide plate is conductive to scoop up the materials; the reasonable design of screen cloth matched with optimized bucket-wheel revolving speed can ensure diminishing the moisture and impurities to the least extent,
• Lower fine sand and stone powder loss and reached the standard request of building sand's gradation and fineness modulus.
• Reasonable designed discharge chute and outfall, which is convenient for the discharge of material and water.
• Bucket-wheel sand washing machine almost has not bearing part except for screen cloth, which provides the machine with long service life and less maintenance.
• It features in greater capacity, lower power consumption, water saving, non-pollution, green and environment protection. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ATAIRAC is a Sino-French cooperation enterprise. By technically cooperating with the French company ALTAIRAC with a business history over hundred years, ATAIRAC engages in further research&development, manufacture and sale of crushing equipment(Jaw crusher, cone crusher, impact crusher, vsi, feeder, vibrating screen, sand washer, ball mill, grinder, etc). At present, ATAIRAC production base covers over 300000 square meters and has a professional technical team with 20 pre-sale service engineers, 102 process engineers, 65 design engineers, over 500 production engineers, over 60 after sales service engineers. Our production base possesses 100000 tons annual production ability of crushing equipment. Our equipment is widely used in the fields of mining industry, cement industry, concrete and aggregate, refractory industry, chemical industry, etc.  

Services of skilled technician(s) to supervise the assembly, installation, commissioning and train the local operator will be supplied after the seller confirms the preparation for installation is ready in the buyer's site. The buyer should prepare the necessary materials, tools, human labors and offer necessary assistance. The reasonable local cost of the technician(s) during installation period including the accommodation, round-trip ticket, insurance, communication fee, etc. are on the account for the buyer. The buyer should pay 100USD per engineer per day within the first 40 days, and 150 dollars in the following time.

100% brand new when leaving the factory. The seller guarantee quality of the machines  (excluding wearing parts)for a period of one year from the date of trial run finish under our technician's guidence, but not exceed 15 months from date on which machine leaves the factory. 

1. Can you give me a solution and quotation?

Answer: Of course. Kindly please tell us information such as, the capacity? (100t/h, 150t/h, 200t/h......) the raw material ?(limestone, pyrite, granite, basalt......) hardness?(soft stone or hard stone...) maximum feed size ?(300mm,400mm,500mm......) output size ? (0-5mm,5-8mm,8-15mm,15-25mm......) the usage of final products ? (for railway, road construction, building......) We will provide the best solution and quotation.

 

2. Which stone is hard? Which stone is soft?

Answer: These stone are hard usually such as granite, basalt, cobble, etc. These stone are soft usually such as limestone, dolomite, gypsum, etc. Your company can give us analysis report about raw material in order to supply suitable equipment for your company.

 

3. How about the shape of aggregate manufactured by your quarry crusher?

Answer: The shape of aggregate has something to do with design of crusher. The shape also has something to do with design of complete stone production line. Our engineers will design complete stone production line based on raw material. The shape of aggregate will be cube which is better compared to other companies.

 

4. How long is date of delivery ?

Answer: The date of delivery is one month. The date of delivery will be extended if the stone production line is too big or the clients have some special requirement.

 

5. How long is the guarantee period of your sand removal equipment ?

Answer: The guarantee period of our company's equipment is 13 months. Wear resistance parts and problem coursed by worker's unsuitable operation are not included.

 

6. What's the after sale service of your company?

Answer: The construction drawings of foundation will be supplied for our clients. What's more, we will supply installation service, workers training service, etc.

 

7. Can you supply wear resistance parts for us if we buy your company's sand removal equipment ?

Answer: Of course we can supply. We have two our own casting factories and We can supply enough wear resistance parts for our clients in order to guarantee machine operation.

  

8. Can your company's sand removal equipment be used in harsh environment like colder than -10ºC or hotter than 50ºC? 

Answer: Of course. Our equipment adopts XYZ-G lubrication and temperature control system. 

PVC Edge Banding For Cabinet

The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.

The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.

Judge good or bad
1. Look at the hue and surface roughness of the edge banding strip. The color of the surface of a good edge banding strip is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).
2. Check the flatness of the surface and bottom of the edge banding and whether the thickness is uniform, otherwise it will cause the joint between the edge band and the board, the glue line is too eye-catching or the gap between the board and the edge band is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.
3. Whether the edge trimming is whitish, whether the surface of the bent edge strip is severely whitish, and whether the ground color of the trimming strip is close to the surface color of the board in question. PVC Edge Banding strips are mainly made of PVC and Calcium Carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Whether the strength is okay and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be made appropriately, and the automatic edge banding machine can make hard points appropriately.
5. Whether the adhesive is applied evenly and whether it is easy to fall off during use.
6. Smell whether the PVC edge banding strips taste or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.

PVC Edge Banding For Cabinet,Pvc Edge Banding,Banding For Cabinet,T Shape Pvc Edge Banding For Kitchen Cabinet

Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbpolymer.com