With the improvement of the quality of life, more and more people are buying cars now. There are more and more people who like to decorate the car. If you love the car, you must give care to your car. In addition to the inspections and maintenance that you can do, you should go to the 4S shop for professional maintenance. Today, Xiaobian introduces you to the common knowledge of car maintenance . Xiaobian specially consulted the car consultant of Beimai. After summarizing, we can divide the maintenance of the car according to the time into three schemes, daily maintenance, weekly maintenance and monthly maintenance. Let's talk about daily maintenance, check the appearance of the car, look at the window glass, and whether the car surface has scratches. The second one requires a tire manometer to see if the tire pressure of the four tires is normal. Observing the car's wiper blades and signal lights is also the indicator light on the instrument panel. Pay attention to the abnormal noise of the engine, abnormal noise of the window, brake pads, check the lights, etc. when driving. Let's talk about weekly maintenance, check the brake oil is not enough, the oil is not enough. When checking the oil, use the oil dipstick, open the engine, wipe the oil dipstick with paper, and then look at the height, this has the lowest size, as long as Just in the middle. Check the air pressure of the spare tire and make a small maintenance for the spare tire. The maintenance of the spare tire is very important. Don't worry about using the spare tire. It is found that the spare tire has become a waste tire. Monthly maintenance is easy after day maintenance and weekly maintenance, but it has to be checked. Check the engine for leaks and impurities in the tank. Glass water is not enough, not enough to buy it yourself. To check the degree of wear of the tire, you can use the one-dollar method or other methods. Serious tires can be replaced or repaired. How about the small car maintenance program? Do you think it helps you? Car maintenance is very important. Your love for the car is also a love for your life. I hope that you can take care of your car and enjoy your trip.
Galvanized steel sheet is carbon steel sheet coated with zinc on two sides. the process used to do this is known as the continuous hot dip process. this process results in a layer of zinc which adheres tightly to the base steel and has a spangled, or snowflake-type, appearance. The layer of zinc acts as a sacrificial coating.
Galvanised steel is mild steel with a coating of zinc The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel Galvanised steel is one of the most widely used products, used extensively in the building sector, automotive, agricultural and other areas where the steel needs to be protected from corrosion. Galvanized Steel Sheet, Hot Dipped Galvanized, Galvanized Sheet Coil, Gi Sheet Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com
Hot-Dip Galvanizing or HDG is a process in which zinc bonds to steel at the molecular level to produce a four-layer corrosion-resistant finish. The first three layers are zinc-iron alloy layers that are actually harder than the base steel. The fourth or top layer is pure zinc.