Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine

Model NO.: 805-c
Shape: Square
Size: Middle-Sized
Power: AC200/110/50Hz
Trademark: joinstars
Transport Package: Carton Box
Specification: 50*60*50cm
Origin: China
Model NO.: 805-c
Shape: Square
Size: Middle-Sized
Power: AC200/110/50Hz
Trademark: joinstars
Transport Package: Carton Box
Specification: 50*60*50cm
Origin: China
Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine

Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine
Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine
Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine
Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine
Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine
Specification
Weight: 30-31KG
Overall Dimensions: 390mm×350mm×235mm
Power: 160-300W   
Mode of Display: LCD Liquid Crystal Display Screen     
Cutting Length: 1mm - 9999mm   
Cutting Tolerance: ≤0.002×L (L = Cutting Length)      
Stripping Length: Head 0 - 35mm ,Tail 0- 15mm  
Cutting Cross-sectional Area of Wire Core:
(508C 0.2-2.5 mm2    508-SD 0.1- 4.5mm2   )
(508E 0.1-8 mm2     508-JE 0.1- 10mm2   )
Maximum Diameter of Conduit Pipe: ¢11
Middle-stripping: 10 places of stripping 

Material of Knife: High-quality Tungsten Steel 

Stripping Speed: 3000 - 80000 p c s /h 
Mode of Driving: Mode C Two-wheeled Drive
Mode SD/SDB/E/JE Four-wheeled Drive
Adjusting Speed: 0 Slowest, 9 Fastest    
  1. Operating Principle
The wire is conveyed through the wire-inlet rollers and the wire-outlet rollers and the wire cutting and stripping is finished through the knife rack assembly, which are all controlled by microcomputer technology.
  1. Introduction to Main Function of Every Part
1. Wire-inlet Rollers: for conveying wires and stripping wire heads.
2. Wire-outlet Rollers: for conveying wires and stripping wire tails.
3. Knife Rack Assembly: for wire cutting, head stripping and tail stripping.
4. Wire-inlet Gap Adjusting Rollers: for adjusting the wire-inlet gap, turn it down to decrease the gap and turn it up to increase the gap. 
5. Wire-outlet Gap Adjusting Rollers: for adjusting the wire-outlet gap, turn it up to increase the gap and turn it down to decrease the gap. 
6. Conduit Pipe Assembly: for ensuring the wire smooth and straight and preventing the wire from moving defectively when the wire moves from the wire-inlet rollers to the knife rack assembly. 
  1. Key Points for Operation of Mechanical Parts
1. The wire is put into the wire inlet, through the wire-inlet rollers and the conduit pipe, and then onto the knife edge.   
2. Wire-inlet Gap Adjusting: adjust the gap between the two rollers through the wire-inlet gap adjusting rollers to make the gap less than the outer diameter of the wire to be stripped so as to ensure normal stripping of wire covering.  
3. Wire-outlet Gap Adjusting: adjust the gap between the two rollers through the wire-outlet gap adjusting rollers to make the gap less than the outer diameter of the wire to be stripped, and adjust the indicator light of wire breakage at the critical state between on and out, then turn up for half circle. If the machine still stops because the wire knobs, adjust the gap a little smaller. 







  Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine

Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine
Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine
Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine
Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine
Cable Stripper/Wire Stripper Machine/ Wire Stripper Machine
Specification
Weight: 30-31KG
Overall Dimensions: 390mm×350mm×235mm
Power: 160-300W   
Mode of Display: LCD Liquid Crystal Display Screen     
Cutting Length: 1mm - 9999mm   
Cutting Tolerance: ≤0.002×L (L = Cutting Length)      
Stripping Length: Head 0 - 35mm ,Tail 0- 15mm  
Cutting Cross-sectional Area of Wire Core:
(508C 0.2-2.5 mm2    508-SD 0.1- 4.5mm2   )
(508E 0.1-8 mm2     508-JE 0.1- 10mm2   )
Maximum Diameter of Conduit Pipe: ¢11
Middle-stripping: 10 places of stripping 

Material of Knife: High-quality Tungsten Steel 

Stripping Speed: 3000 - 80000 p c s /h 
Mode of Driving: Mode C Two-wheeled Drive
Mode SD/SDB/E/JE Four-wheeled Drive
Adjusting Speed: 0 Slowest, 9 Fastest    
  1. Operating Principle
The wire is conveyed through the wire-inlet rollers and the wire-outlet rollers and the wire cutting and stripping is finished through the knife rack assembly, which are all controlled by microcomputer technology.
  1. Introduction to Main Function of Every Part
1. Wire-inlet Rollers: for conveying wires and stripping wire heads.
2. Wire-outlet Rollers: for conveying wires and stripping wire tails.
3. Knife Rack Assembly: for wire cutting, head stripping and tail stripping.
4. Wire-inlet Gap Adjusting Rollers: for adjusting the wire-inlet gap, turn it down to decrease the gap and turn it up to increase the gap. 
5. Wire-outlet Gap Adjusting Rollers: for adjusting the wire-outlet gap, turn it up to increase the gap and turn it down to decrease the gap. 
6. Conduit Pipe Assembly: for ensuring the wire smooth and straight and preventing the wire from moving defectively when the wire moves from the wire-inlet rollers to the knife rack assembly. 
  1. Key Points for Operation of Mechanical Parts
1. The wire is put into the wire inlet, through the wire-inlet rollers and the conduit pipe, and then onto the knife edge.   
2. Wire-inlet Gap Adjusting: adjust the gap between the two rollers through the wire-inlet gap adjusting rollers to make the gap less than the outer diameter of the wire to be stripped so as to ensure normal stripping of wire covering.  
3. Wire-outlet Gap Adjusting: adjust the gap between the two rollers through the wire-outlet gap adjusting rollers to make the gap less than the outer diameter of the wire to be stripped, and adjust the indicator light of wire breakage at the critical state between on and out, then turn up for half circle. If the machine still stops because the wire knobs, adjust the gap a little smaller. 







 

Concrete Batching Plant

Ready Concrete Batching Plant consists of 9 sections, aggregate weighing and conveying system, cement weighing system, water weighing system, additive weighing system, mixer system, dust removal system,pneumatic system, computer control system and Cement Silo. The modular design to make quickly installation and relocation; the fully automatic control system to make easily operation and reduce the civil workers; the external packing of the mixing tower and main conveyor to reduce the dust and noise emission and looks beautiful. HZS series Ready Concrete Batching Plant including the model of HZS60, HZS90, HZS120 and HZS180.


Main Features of Ready Concrete Batching Plant :

a. all separate weighing to make sure fast dosing and high accuracy

b. production capacity guaranteed

c. easy to do maintenance, low cost and long life

d. modular design, can be installed fast and less welding on site

e. Impulse dust filter collect the dust and reuse it.


f. Double computer synchronized control, no-stop production.


g. Easy to save and print the report for customer or financial analysis.


Concrete Batching Plant,Ready Concrete Batching Plant,Stationary Concrete Batching Plant,Concrete Mixing Plant

Zhengzhou SMART Machinery Manufacture Co.,Ltd , https://www.simamax.com