45*75 Mm Radial Tire Repair Patch

Model NO.: RP-T451
Trademark: HOPSON TYRE REPAIR
Origin: Ningbo, China
Model NO.: RP-T451
Trademark: HOPSON TYRE REPAIR
Origin: Ningbo, China

 


45*75 Mm Radial Tire Repair Patch

Don't miss the opportunity to check our full range of tire repair products. 

 

HOPSON TYRE REPAIR will always surprise you! 

General Info.

 

Part No.: RP-T451

Specification: 45×75mm, 1 ply

Packing: 20pcs/box, 24box/CTN

MEAS: 21.5X17.5X24CM

N.W/G.W: 5.6/5.8KG

 

Selling Points

 

1. Each reinforcing ply individually end-wrapped to defect tire flexing stresses in a unique manner.

2. Tie-gum construction eliminates the potential for delamination common in competitive products.

3. Designed to vulcanize chemically or in low temperature systems

4. Gray vulcanizing gum, blue poly backing

 

Quality Guaranteed

 

Excellent quality, similar to Rema Tip Top and Tech; Samples can be sent for customer's testing and evaluation.

 

Description

 

HOPSON offers a variety of radial-ply repair units to meet the diverse demands of today's passenger, truck, and OTR tire applications. HOPSON radial repair patches are thick, rubber-reinforced patches which allow placement on the tyre in any direction. A special compounding and design allow the repair unit to flex and resist heat, assuring a permanent repair.

 

INSTRUCTIONS

  • Inspect tyre for repairability using tyre manufacturer of HOPSON LAB guideline. If repairable, mark injury with crayon and carefully remove injuring object.
  • Probe injury to determine exact size and direction, removing all deris.
  • Select the appropriate repair patch for injury and type of tire. Apply prebuff cleaner to repair area and use rubber scraper to remove dirt and mold lubricants. Using carbide cutter, drill injury channel 3 times from inside then 3 times fron outside, making sure all damaged and rusted cables have been removed and only good rubber remains.
  • Cement the injury channel with Chemical Vulcanizing Cement and install the appropriate vulcanizing insert. Trim flush with the tire innerliner. Mechanically buff outlined repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to buffed area, working into rubber and ALLOW TO DRY THOROUGHLY.
  • Remove backing and center repair patch over injury and thoroughly stitch down from center out to remove trapped air.
  • Finish repair by applying Inner Liner Sealer around edge of repair patch and to overbuff area.

Don't miss the opportunity to check our full range of tire repair products. 

 

HOPSON TYRE REPAIR will always surprise you! 

 

45*75 Mm Radial Tire Repair Patch

45*75 Mm Radial Tire Repair Patch

Part No. Size(mm)   Description Box Qty Case Qty
RP-T451 45×75   1 Ply 20  24
 RP-T601 60×110   1 Ply 10  24 
 RP-T651 65×80   1 Ply 10 24 
 RP-T701 70×120 1 Ply   10 24 
 RP-T751 75×125 2 Ply 10 24 
 RP-T752 75×145 2 Ply   10 24 
 RP-T753 75×165 2 Ply 10 24 
 RP-T754 75×220 2 Ply 10 24  
 RP-T755 75×250 2 Ply 10 24 
 RP-T1001 100×125 3 Ply 10 12
 RP-T1002 100×200 4 Ply 10 12 
 RP-T1250 125×150 4 Ply 10 12 
 RP-T1251 125×170 4 Ply 10 12  
 RP-T1252 125×250 5 Ply 10 12  
 RP-T1253 125×330   5 Ply 10 12 
 RP-T1801 180×230   5 Ply 10 8 
 RP-T1802 180×440  5 Ply    5 4 
 RP-T2005 200 ×350 5 Ply 5 4

 


45*75 Mm Radial Tire Repair Patch

Don't miss the opportunity to check our full range of tire repair products. 

 

HOPSON TYRE REPAIR will always surprise you! 

General Info.

 

Part No.: RP-T451

Specification: 45×75mm, 1 ply

Packing: 20pcs/box, 24box/CTN

MEAS: 21.5X17.5X24CM

N.W/G.W: 5.6/5.8KG

 

Selling Points

 

1. Each reinforcing ply individually end-wrapped to defect tire flexing stresses in a unique manner.

2. Tie-gum construction eliminates the potential for delamination common in competitive products.

3. Designed to vulcanize chemically or in low temperature systems

4. Gray vulcanizing gum, blue poly backing

 

Quality Guaranteed

 

Excellent quality, similar to Rema Tip Top and Tech; Samples can be sent for customer's testing and evaluation.

 

Description

 

HOPSON offers a variety of radial-ply repair units to meet the diverse demands of today's passenger, truck, and OTR tire applications. HOPSON radial repair patches are thick, rubber-reinforced patches which allow placement on the tyre in any direction. A special compounding and design allow the repair unit to flex and resist heat, assuring a permanent repair.

 

INSTRUCTIONS

  • Inspect tyre for repairability using tyre manufacturer of HOPSON LAB guideline. If repairable, mark injury with crayon and carefully remove injuring object.
  • Probe injury to determine exact size and direction, removing all deris.
  • Select the appropriate repair patch for injury and type of tire. Apply prebuff cleaner to repair area and use rubber scraper to remove dirt and mold lubricants. Using carbide cutter, drill injury channel 3 times from inside then 3 times fron outside, making sure all damaged and rusted cables have been removed and only good rubber remains.
  • Cement the injury channel with Chemical Vulcanizing Cement and install the appropriate vulcanizing insert. Trim flush with the tire innerliner. Mechanically buff outlined repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to buffed area, working into rubber and ALLOW TO DRY THOROUGHLY.
  • Remove backing and center repair patch over injury and thoroughly stitch down from center out to remove trapped air.
  • Finish repair by applying Inner Liner Sealer around edge of repair patch and to overbuff area.

Solder Ring Bronze Fittings

solder ring Bronze Fittings produced as kembla and connex,the lead of the solder is much lower than them,solder ring bronze fittings,pre-solder bronze fittings,yorkshire solder ring fittings,connex solder ring fittings,solder ring gunmetal fittings,solder ring bronze fittings,pre-solder bronze fittings,yorkshire solder ring fittings,connex solder ring fittings,solder ring gunmetal fittings

solder ring bronze fittings,pre-solder bronze fittings,yorkshire solder ring fittings,connex solder ring fittings,solder ring gunmetal fittings

Taizhou Runde Company , https://www.zjbrassfittings.com