Structure of auto control arms Corolla Control Arm,Lower Control Arm Ford Focus,Left Suspension Control Arm,Control Arm Suspension Lift Saga Auto Parts Co., Ltd. , https://www.sagatd.com
material
Grade AÂ Â Wc-10 tungsten carbide alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc
The index of hardness
HRC62-65,the service life of 5-6 times longer than the nitrided one
Characteristics of alloy powder
High wearing resistance,high corrosion resistance and high temperature resistance
Apply to
Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic
material
Grade BÂ Ni-20 Ni-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc
The index of hardness
HRC60-63,the service life of 4-5 times longer than the nitrided one
Characteristics of alloy powder
High corrosion resistance,high wearing resistance and high temperature resistance
Apply to
PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc
material
Grade C Fe-30 Fe-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Fe,C,Si,Cr,B,Mo,Ni, Co,etc
The index of hardness
HRC59-61,the service life of 3-5 times longer than the nitrided one
Characteristics of alloy powder
Wearing and corrosion resistance
Apply to
Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc
Product Display
Equipment Display
Processing
Packing&Delivery
Contact Us
Â
material
Grade AÂ Â Wc-10 tungsten carbide alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc
The index of hardness
HRC62-65,the service life of 5-6 times longer than the nitrided one
Characteristics of alloy powder
High wearing resistance,high corrosion resistance and high temperature resistance
Apply to
Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic
material
Grade BÂ Ni-20 Ni-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc
The index of hardness
HRC60-63,the service life of 4-5 times longer than the nitrided one
Characteristics of alloy powder
High corrosion resistance,high wearing resistance and high temperature resistance
Apply to
PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc
material
Grade C Fe-30 Fe-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Fe,C,Si,Cr,B,Mo,Ni, Co,etc
The index of hardness
HRC59-61,the service life of 3-5 times longer than the nitrided one
Characteristics of alloy powder
Wearing and corrosion resistance
Apply to
Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc
Product Display
Equipment Display
Processing
Packing&Delivery
Contact Us
Â
1. Stabilizer bar link
During the suspension installation, one end of the stabilizer bar link is connected with the lateral stabilizer bar through the rubber bushing, and the other end is connected with the control arm or bucket shock absorber through the rubber bushing or ball hinge. The lateral stabilizer bar link is used symmetrically in the home selection, which can improve the operation stability.
2. Tie rod
When the suspension is installed, the rubber bushing at one end of the tie rod is connected with the frame or body, and the rubber bushing at the other end is connected with the wheel hub. This kind of control arm is mostly used in multi link suspension and tie rod of steering system, which mainly bears lateral load and guides wheel movement.
3. Longitudinal link
The longitudinal link is mostly used for drag suspension to transfer traction and braking force.
4. Single control arm
This kind of vehicle control arm is mostly used in multi link suspension, and two single control arms can transfer the lateral and longitudinal loads from the wheels.
5. Fork (V) arm
This kind of vehicle control arm is mostly used in the upper and lower arms of double wishbone independent suspension and the lower arm of McPherson suspension. The fork structure of the arm body mainly transfers the transverse load.
6. Triangular arm
This kind of vehicle control arm is mostly used in the lower arm of the front suspension McPherson suspension, which is used to transfer the transverse and longitudinal load and control the relative movement of the wheel and the body.
2018 Hot Sale Single Screw Barrel for Extruder Machine
HS Code: 84779000
HS Code: 84779000
Production DescriptionÂ
Â
Â
Â