2 Stage Hand Feeding Automatic Wide Neck Pet Jar/Bottle Blow Molding Machine

Product Description
2 Stage Hand Feeding Automatic Wide Neck Pet Jar/Bottle Blow Molding Machine is suitable for producing PET plastic containers and bottles from 10-1000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.

TECHNICS FLOW CHART 2 Stage Hand Feeding Automatic Wide Neck Pet Jar/Bottle Blow Molding Machine:

Features of 2 Stage Hand Feeding Automatic Wide Neck Pet Jar/Bottle Blow Molding Machine :

1.Stable performance with advanced PLC.

2.Conveying preforms automatically with conveyor.

3.Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

4.High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area and eternal temperature in the preheater with an automatic thermostatic apparatus.

5.High safeties with security automatic-locking apparatus in each mechanical action,which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.

6.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

7.Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

8.Strong clamping force with high pressure and double crank links to lock the mold.

9.Two ways of operating: automatic and manual.

10.Safe,reliable and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

11.Low cost,high efficiency,easy operation,easy maintenance,etc,with automatic technological process.

12.Contamination is avoided for the bottle body.

13.Ideal effect of the chilling with the chilling system.

14.Easy installation and starting.

15.Low rejection rate:less than 0.2 percent.             

Company Information

Taizhou RY machinery equipment Co., Ltd. is a company specializing in the production of bottle  blowing machines and molds . RY is equipped with strong technology , sophisticated production  equipment, advanced detection equipment and perfect management system.

RY series bottle blowing machine is a reliable equipment which is simple operated, energy-saving,environment-friendly and widely applicated . The equipment adopts famous brands from  
Germany, Japan and Taiwan, which is suitable for various plastic including PET, PP, PC, PA, PS etc

In line with high efficiency, high precision design concept, RY manufactures series multi-function bottle blowing  machines and molds with convenient maintenance , safe and reliable  performance.High performance cost ratio and well-developed after sales services make our  products fast sellers not only in China but in many countries and regions in Europe, America,  Middle East, southeast Asia, Oceania etc.



Packaging&Shipping



Payment


 

Our Services

1.we can send you the video of the running machine.
2.you are always welcome to come to visit our factory, and you may see the operation of the machines here . We will make the arrangement to pick you up when you come .
3.If we get the permission of the customer who has brought the machines from us ,we can tell you their contact information, you can go to visit their factory.

After-sales service
1.we will provide the bill of load on time to make sure you can get the machine quickly
2.when you finish the Preparation conditions ,our engineer will go to your factory for the installation, testing and also training .
3.we provide One Year warranty with spare parts free.

Contact Us


 

FAQ

Q: what is your trade term?

A: normally FOBNINGBO, if customer country requires, also can accept L/C at sight.

Q: what is your payment term?

A: 30% down payment against order confirmation, 70% balance payment prior shipment.

Q: Have blow machine 100% assemnled well in stock?

A: NO.All blow machine will be assembly produced according to your order.

Q:what is your delivery time?

A: usually in 10-45days, depends on your projects.

Q: what about installing in customer factory?

A: after machine arrive your factory, please prepare water, electric,air and perform, then we will arrange engineer to install machine and train your workers, the longest time to free installing shall be in one week, you should afford engineer air tickets, food, hotel,transport.

Q: what is your packing?

A: wooden pallet packing.

Q:guarantee time?

A: one year guarantee, not man-made.

Product Description
2 Stage Hand Feeding Automatic Wide Neck Pet Jar/Bottle Blow Molding Machine is suitable for producing PET plastic containers and bottles from 10-1000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.

TECHNICS FLOW CHART 2 Stage Hand Feeding Automatic Wide Neck Pet Jar/Bottle Blow Molding Machine:

Features of 2 Stage Hand Feeding Automatic Wide Neck Pet Jar/Bottle Blow Molding Machine :

1.Stable performance with advanced PLC.

2.Conveying preforms automatically with conveyor.

3.Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

4.High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area and eternal temperature in the preheater with an automatic thermostatic apparatus.

5.High safeties with security automatic-locking apparatus in each mechanical action,which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.

6.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

7.Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

8.Strong clamping force with high pressure and double crank links to lock the mold.

9.Two ways of operating: automatic and manual.

10.Safe,reliable and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

11.Low cost,high efficiency,easy operation,easy maintenance,etc,with automatic technological process.

12.Contamination is avoided for the bottle body.

13.Ideal effect of the chilling with the chilling system.

14.Easy installation and starting.

15.Low rejection rate:less than 0.2 percent.             

Company Information

Taizhou RY machinery equipment Co., Ltd. is a company specializing in the production of bottle  blowing machines and molds . RY is equipped with strong technology , sophisticated production  equipment, advanced detection equipment and perfect management system.

RY series bottle blowing machine is a reliable equipment which is simple operated, energy-saving,environment-friendly and widely applicated . The equipment adopts famous brands from  
Germany, Japan and Taiwan, which is suitable for various plastic including PET, PP, PC, PA, PS etc

In line with high efficiency, high precision design concept, RY manufactures series multi-function bottle blowing  machines and molds with convenient maintenance , safe and reliable  performance.High performance cost ratio and well-developed after sales services make our  products fast sellers not only in China but in many countries and regions in Europe, America,  Middle East, southeast Asia, Oceania etc.



Packaging&Shipping



Payment


 

Our Services

1.we can send you the video of the running machine.
2.you are always welcome to come to visit our factory, and you may see the operation of the machines here . We will make the arrangement to pick you up when you come .
3.If we get the permission of the customer who has brought the machines from us ,we can tell you their contact information, you can go to visit their factory.

After-sales service
1.we will provide the bill of load on time to make sure you can get the machine quickly
2.when you finish the Preparation conditions ,our engineer will go to your factory for the installation, testing and also training .
3.we provide One Year warranty with spare parts free.

Contact Us


 

FAQ

Q: what is your trade term?

A: normally FOBNINGBO, if customer country requires, also can accept L/C at sight.

Q: what is your payment term?

A: 30% down payment against order confirmation, 70% balance payment prior shipment.

Q: Have blow machine 100% assemnled well in stock?

A: NO.All blow machine will be assembly produced according to your order.

Q:what is your delivery time?

A: usually in 10-45days, depends on your projects.

Q: what about installing in customer factory?

A: after machine arrive your factory, please prepare water, electric,air and perform, then we will arrange engineer to install machine and train your workers, the longest time to free installing shall be in one week, you should afford engineer air tickets, food, hotel,transport.

Q: what is your packing?

A: wooden pallet packing.

Q:guarantee time?

A: one year guarantee, not man-made.

Customized Seamless Steel Tube

Shandong Yuzhong Steel Co., Ltd. , https://www.cnyzsteel.com